To Make a Skype Conference Call:
1.When you already engaged on an ongoing call, if another Skype call is received, press Right key to enter option menu;
2.Then press Scrolling button to select Hook up and press Left key;
3.Press Right key to enter option menu again;
4.Press Scrolling button to select Conference Call;
5.Press Left key to connect the three parties together.
Note: You cannot host a conference call by yourself but can be invited to participate in a conference call opened by the other Skype users.
Resetting the system
If you have set a PIN and forgotten it, you need to reset the system. The Base PIN will be reset to 0000. If you reset the system, you will lose all stored information (including numbers in memory) and all features will return to their default settings. You need to register the handset to the base unit again.
While you are resetting the system, you should disconnect the telephone line cord from the back of the base unit, so you won't be interrupted by incoming calls. To reset the system without the PIN:
1.Disconnect the power lead from the back of the base unit
2.Press and hold the HANDSET LOCATOR button in the base unit, at the same time connect the power lead into the back of base unit. Release the LOCATOR button after you hear “beep” sound for five times. The IN USE light on base unit lights during this whole process.
3.After 2~3 seconds, you can hear “beep” sound for two times again and the IN USE light goes off;
4.Disconnect the power lead from base. Reconnect and you will hear a confirmation tone from the base unit.
Intercom and transfer
To Make an Intercom Call
1.Press the INT key. You hear Dial tone
2.Key in the number of the other handset
On the other handset's display, your number appears, and the INT symbol flashes. Then the other handset user presses the Call key to connect the call.
For details of how to change the ringing melody and volume for intercom calls, see "INT MELODY" and "INT VOLUME" under "HANDSET SETTING" part.
To End an Intercom Call
Press the Call key on your handset. The other person will hear Busy tone, and also need to press the End key to hand up.
To transfer the outside call to another handset (if you have two or more handsets):
1.Press the INT key and key in the number of the other handset.
2.The outside call is put on hold. When the other handset answers, you can speak to the user. If the other handset does not answer, you can get back to the outside call by pressing the INT button again.
To transfer the outside call to another outside phone (Network Dependent):
1. Press the Recall key and key in the call number you want to transfer.
15