INSTALLATION
E N G
Warning: To prevent electrical shock, always remove the telephone line cord from the wall jack before removing the cord from the telephone. Never leave the line cord connected to the wall jack if it is not also connected to the telephone.
AC adapter should be unplugged when not in use.
➤Select a Location:
•This unit requires a modular phone jack and a standard 120 volt outlet.
•The unit should be located in an area where it is easy to see the lighted ringer.
•The unit can be used as a desk top phone or a wall mount phone.
Avoid placing the unit where it will be exposed to excessive heat or humidity.
➤Connecting the Clarity Phone:
To install as a Desk Unit:
•Plug one end of the telephone line cord (long, flat) into the back of the Walker Clarity.
•Plug the other end of the telephone line cord into the wall jack.
•Plug one end of the handset cord (coiled) into the bottom of the handset.
•Plug the other end of the handset cord into the jack located on the left edge of the Walker Clarity.
•Place the handset in the cradle of the Walker Clarity.
•Connect AC adapter into back of unit and plug directly into standard 120 volt outlet.
L
I
S
H
7