Troubleshooting

Always check first that:

•You have followed the steps listed on pages to install and set up your SD2100.

•All connects are firmly inserted in their sockets.

•Mains power is switched on at the socket.

•The handset’s batteries are correctly and securely installed, and are not run down.

If you experience difficulties with the working of your SD2100, refer to the advice given below.

I cannot make or answer calls.

Check that the base unit’s mains power adapter is plugged in and power is switched on. The base unit needs mains power for normal operation of the phone-not just charging the batteries.

Make sure you are using the telephone line cable that was supplied with your SD2100. Other telephone line cables might not work.

Move the handset closer to the base unit.

Check the batteries level symbol on the display. If it is low, replace the handset on the base unit or charger pod to recharge the batteries.

Switch off power at the mains socket, wait for a few seconds and then switch back on. This may solve the problem.

If you still can’t make calls, try re-registering the handset.

When I press keys on the handset, nothing happens.

Make sure the batteries are fitted in your handset. If the batteries level symbol on the display shows “low”, recharge the batteries.

Check whether there’s a key symbol on the display. If so, the keypad is locked. Turn to the user manual to find out how to unlock it.

When I press keys on the handset, digits appear on the display, but I can’t make an outside call.

Call barring may have been set, see the user manual for more information. Try moving the handset closer to the base unit. Try a different position for the base unit-perhaps higher, or further from other electrical equipment.

The phone does not ring

Check that the base unit’s mains power adapter is plugged in and power is switched on. The base unit needs mains power for normal operation of the phone-not just charging the batteries.

Make sure you are using the telephone line cable that was supplied with your SD2100. Other telephone line cables might not work.

Check that you have set the ringer volume to off. See the user manual for more information.

Check that the total REN value of all equipment connected to your telephone line is no more than 4. Disconnect one or more telephones and see whether that helps.

The base does not ring.

Check that the base power is ON, and the base ringer is set ON.

Check that the line cord is correctly fitted and undamaged.

The CHARGE light on the base unit does not come on."

Check the handset is properly stationed.

Check the connections between the base unit and mains power socket.

Clean the batteries charging contacts with a dry cloth.

When I press the CALL button, I hear a loud noise.

SD2100 specifications

The Shiro SD2100 is an advanced electric scooter designed with an emphasis on performance, efficiency, and user convenience. Ideal for urban commuting and short-distance travel, the SD2100 stands out due to its robust features and cutting-edge technologies.

One of the main features of the Shiro SD2100 is its powerful electric motor, which delivers an impressive maximum output. This ensures swift acceleration and the ability to tackle various terrains, including inclines. The scooter's top speed can reach up to a competitive limit, making it a practical option for those who need to get to their destination quickly.

The SD2100 is equipped with a high-capacity lithium-ion battery that offers extended range capabilities. Riders can expect to travel significant distances on a single charge, significantly reducing the need for frequent recharging during daily use. Moreover, the battery management system optimizes energy consumption, enhancing the overall lifespan of the battery.

Safety is a key consideration in the design of the Shiro SD2100. The scooter comes with high-quality disc brakes that provide reliable stopping power, helping to ensure the safety of the rider in various circumstances. The incorporation of bright LED lights enhances visibility during nighttime rides, ensuring that riders are seen by others on the road.

Additionally, the SD2100 features a sturdy, lightweight frame made from premium materials, combining durability with easy portability. The scooter can be easily folded, making it a practical choice for public transport users or those with limited storage space. The ergonomic design of the handlebars and platform contributes to a comfortable ride, allowing users to travel longer distances without fatigue.

The inclusion of smart connectivity features is another highlight of the Shiro SD2100. Riders can connect their smartphones to the scooter via Bluetooth, providing access to various functions such as battery status, speed tracking, and route planning. This integration enhances the overall riding experience by offering valuable insights at a glance.

In summary, the Shiro SD2100 is a feature-rich electric scooter that combines performance, safety, comfort, and smart technology. Its powerful motor, long-lasting battery, and modern design make it an excellent choice for daily commuters and casual riders alike, catering to the growing demand for sustainable urban transportation solutions.