Shiro SD2100 user manual Handset and Base Unit

The Handset and Base Unit

MENU/ Mute button

Press to enter menu mode and enter sub- menu. With the key

" " to lock or unlock the keypad.

Press during a call to mute the microphone

Recall button

You can activate Recall function if your phone is connected to a PABX, or if you use Select Services. Press to transfer an outside call to another phone.

Call button

Press tobegin,answerand

andswerend athelephonecall call.

UP/DOWN button

In standby mode, press to show phonebook list; Press during programming to move through the menu. Press during a call to change the volume in the earpiece.

Before you can use the handset to make calls for the first time, you will need to fit and fully charge the battery for 15 hours.

PHONEBOOK/OK button

In standby mode, press to enter phonebook menu. Press to confirm selection.

INT button

Press to make an intercom call (if you have more than one handset)

Clear / On-Off /END button

Press and hold (2-3 seconds) to switch the handset on and off. Press during programming to go back to the previous option, or to clear digits one by one from the display. Press to end the call.

IN USE light

The IN USE light comes on when you have a connection to the telephone line.

HANDSET LOCATOR button

Press this to make the handset ring,

if you cannot remember where you put it. Press it again to stop the handset ringing.

2