GETTING STARTED
Telephone line connection
Once the handset battery is fully charged, connect the telephone line cord to the THE LINE jack on the back of the base. Plug the other end into a telephone outlet.
Low battery warning
The battery icon indicates the battery status:
FULL | EMPTY |
1.If the battery power is low, and the phone is in TALK mode, a warning tone will sound from the handset and ' LOW BATTERY ' will appear on the screen.
2.If the battery is low and the phone is in STANDBY mode, ' LOW BATTERY ' will appear on the screen.
Removing and replacing handset battery pack
After years of use,all NiMH rechargeable batteries loose the ability to hold a full charge and may need to be replaced. The handset uses 1 NiMH 650 mAh 3.6V
(AAA)rechargeable battery pack. Only replace with an approved battery pack available through SANYO. Contact the SANYO Customer Service Center at
WARNING:There is a risk of explosion if battery pack is replaced with an incorrect type. Dispose of used battery pack according to your local waste management guidelines.
To install a replacement handset battery pack:
1. Remove the battery door cover on the telephone handset.
2. Insert the battery pack according to polarity engraved as shown.
3. Slide the cover back on so that it clicks firmly into place.
- |
- |
+ |
12 |