Sanyo CLT-D5883, CLT-D5880, CLT-D5882 Setting Voice Mail Tone, De-register the Handset

UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 23

USING THE INTERFACE

Setting Voice Mail Tone

Voice Mail Tone sets the voice mail tone. If your service does not support SDT message signal, set your VMWI (Visual Message Waiting Indicator) not to detect SDT message signal.

1 Press MENU soft key. Select the Global Setup menu, and then the Voice Mail Tone Submenu.

2 Press VOL/▲ or VOL/▼ to set the voice message indication (SDT message signal) to On or Off.

Voice Mail Tone

On

Off

BACK DELETE OK

3 Press the OK soft key. You will hear a confirmation tone.

De-register the Handset

Deregister HS clears the handset's ID from the main base unit or the base ID from the handset. You will usually only deregister the handset if you are having a problem with your phone or if you need to change the digital security code. (see page E49).

1

2

In standby mode, select Deregister HS in the menu	Deregister		HS?
	Yes
and press the OK soft key.
	No
Deregister HS? appears.	BACK	DELETE	OK

Press VOL/▲ to select Yes and then the OK soft key.

When de-registration is complete you will hear a confirmation tone, and Deregistration Complete appears.

3 After de-registering the handset, place the handset to the base to register. You must re-register the handset before you can use it.

E23