Sanyo CLT-D5880, CLT-D5883, CLT-D5882 instruction manual Troubleshooting, Symptom Suggestion

UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 52

ADDITIONAL INFORMATION

Troubleshooting

If your phone is not performing to your expectations, please try these simple steps first.

Symptom	Suggestion
The CHARGE LED	• Make sure the AC adapter is plugged into the base or
won't illuminate	the charger (if you have more than one handset) and
when the	wall outlet.
handset is	• Make sure the handset is properly seated in the cradle.
placed in the	• Make sure the charging contacts on the handset are
cradle.	clean.
The audio	• Move the handset and/or base away from metal objects
sounds weak.	or appliances and try again.
	• Make sure that you are not too far from the base.
Can't make or	• Check both ends of the base telephone line cord.
receive calls.	• Make sure the AC adapter is plugged into the base and
	wall outlet.
	• Disconnect the AC adapter for a few minutes, and then
	reconnect it.
	• De-register the handset (see "De-register the Handset"
	on page E23).
	• Change the digital security code (see "Changing the
	Digital Security Code" on page E49).
	• Make sure that you are not too far from the base.
	• Make sure the line is not in use.
	• If an outside call is already established, you cannot
	make another outside call.
The handset	• Charge the batteries in the handset for 15-20 hours by
doesn't ring or	placing the handset on the base or charging cradle.
receive a page.	• Make sure that you are not too far from the base.
	• De-register the handset (see "De-register the Handset"
	on page E23).
	• Change the digital security code (see "Changing the
	Digital Security Code" on page E49).
Unavailable	• Make sure that another handset(s) is not in use, and try
appears in the	the phone again.
display.	• Make sure that you are not too far from the base.

E52