CLT2430 5th 8/9 8/10/00 4:28 PM Page 11
GETTING STARTED
Mounting the base unit on a wall
Standard wall plate mounting
This phone can be mounted on any standard telephone wall plate.
1
2 - 7
1Attach the bottom bracket to the base as shown. Make sure all tabs snap into the notches on the base.
2Plug the telephone line cord to the TEL LINE jack and the small plug of AC adaptor to the DC IN 9V jack.
3Plug the telephone line cord into the telephone outlet.
4Fit the AC adaptor cord into the molded groove. Then wrap the cord around the strain relief notch.
5Plug the AC adaptor into a standard
6Raise the antenna to a vertical position.
7Align the mounting slots on the base with the mounting posts on the wall. Push in and down until the phone is firmly seated.
E7