CLT2430 5th 8/9 8/10/00 4:29 PM Page 20
BASICS
Lighted keypad
The dialing keypad and the TALK/END key on the handset light up when you press any key on the keypad. The light turns off if no key is pressed for 5 seconds.
Scanning
Your phone automatically selects the clearest possible channel every time you receive or place a call. Should you wish to switch channels during a call, the handset provides a DELETE/SCAN button.
Adjusting the ringer and speaker volume
Ringer volume
In the standby mode, press CALL REVIEW/
VOLUME or on the handset to set the handset ringer volume.
The phone has two ringer tones, each with two volume levels.
Ringer A High
Ringer A Low
Ringer B High
Ringer B Low
Earpiece volume/handset speaker volume
Pressing CALL REVIEW/VOLUME or during a telephone call will change the earpiece volume/handset speaker volume. This setting will remain in effect even after you hang up the telephone.
When you press in Loud mode or press in Normal mode, a beep sounds.
<Loud>
<High>
<Medium>
<Normal>
RING VOL
Base ringer switch
This switch sets the base ringer HI, LOW, or OFF.
Base speaker volume control
To control the speaker volume of the base, adjust the VOLUME slide switch as desired.
E16 | VOLUME |
|