Sanyo CLT-5812 instruction manual Tip

Page 10

UP016DH(CLT5812) ENG OM 3/7/05 5:21 PM Page 8

GETTING STARTED

•After installing the battery packs in the handsets, charge your handsets at least 15-20 hours before plugging into the phone line.

4 Place one handset in the base unit and one handset in the charging cradle for 15-20 hours without interruption. The base or charging cradle unit’s LED light (labeled CHARGE/IN USE or CHARGE) illuminates once the handset is placed in the base and charging cradle. The LED light will illuminate whether the battery pack is connected or not.

If the base or charging cradle CHARGE/IN USE or CHARGE LED light does not illuminate:

•Check to see if each AC adapter is plugged into each charging

cradle and the electrical wall outlet properly. (Use only the supplied AC adapter. Do not use any other AC adapter.)

•Check to see if each handset is sitting correctly in each charging cradle and making good contact with each charging contacts.

5 Once the handset battery packs are fully

charged, connect the telephone line cord to the TEL LINE jack and

to a telephone outlet.

Tip:

If your telephone outlet isn't modular, contact your telephone company for assistance.

Modular

E8

Image 10

Contents GHz Features IntroductionContents Controls and functions Dual HandsetsCHARGE/IN USE LED Setting up the phone Checking the package contentsGetting Started Install the rechargeable battery packs into the handsets Talk Mode Low battery alertCleaning the battery charging contacts Standby ModeRoute the cord Tip Before using, register second handset to the base unit Follow these simple steps to registerTo transfer a call to the second handset When to re-register handsetsCall transfer feature To receive a transfer call from the second handsetMounting the base unit on a wall Standard wall plate mountingDirect wall mounting Setting menu options Changing your Automatic Talk Auto Talk and CidcwEntering your area code Choosing the dialing mode Setting the languageHandset On Base BasicsMaking and receiving calls Or Charging CradleEarpiece volume Adjusting the handset ringer and earpiece volumeHandset ringer tone and volume Temporarily mute ringerRedial Tone dialing switch-overTraveling out-of-range Selecting a different channel Flash and call waitingVoice mail waiting indicator Directory Storing phone numbers and namesE22 Steps for entering names and special characters If you make a mistake while entering a nameE24 Memory dialing from Talk Mode Memory dialing from Standby ModeMaking calls with memory dialing Chain dialing Editing a stored name and/or phone number SELECT/CH keyE28 Erasing a stored name and phone number ¨Delete MemoryXX?¨ appearsSpeed dial Speed DialStoring and editing the speed dial Making calls with the speed dial Deleting the speed dialYou must subscribe to Caller ID service to use this feature Caller ID FeaturesWhen the telephone rings Caller IDViewing the Caller ID message list Deleting information from the Caller ID list When the pointer is at ¨Yes¨When the pointer is at ¨No¨ Deleting a Caller ID messageCaller ID Features Long Distance calls and Area Code Setting/Cancellation Using the Caller ID listCalling a party from the Caller ID list Storing Caller ID messages in memory dialing Returns to the Caller ID listChanging the digital security code Installing the beltclipAdditional Information To attach the beltclipBattery replacement and handling Power FailureTroubleshooting Symptom Suggestion CHARGE/INSymptom Suggestion Unavailable Important Safety Instructions Technical InformationSanyo Comfort Warranty Sanyo Canada INC.’S ResponsibilitySOS Help Line Shipping costs of the unit back to SanyoUCZZ01016DZ