Sharp SL-5500 manual To charge the battery using the AC adapter

00 Cover.book Page 7 Saturday, January 19, 2002 11:33 AM

Quick Start 7

5.Slide the battery replacement switch to the “NORMAL OPERATION” position. When you use the battery for the first time, charge the battery.

To charge the battery using the AC adapter

Note: Only use the “EA-70” AC adapter (supplied).

1. Connect the AC power cord to the AC adapter.

AC adapter

AC power cord

2.Plug the AC adapter connector into the SL- 5500 which contains the battery as shown on the right.

AC adapter jack	To AC
	outlet

AC power cord

AC adapter connector

AC adapter

3.Plug the AC power cord into an AC outlet.

The LED indicator on the unit (charge light) will turn amber when charging begins.

Standard charging time is approximately 2.5 hours (depending on the temperature and usage conditions).

4.When charging has been completed, the LED indicator will turn off. Unplug the AC power cord from the AC outlet, then unplug the AC adapter connector from the SL-5500.

Note:

• Charge the battery to its full capacity until the LED indicator turns off.