
Chapter 3 — Phone Operation
You can also enable the function for a period of time.
To activate the feature, do the following:
1.Press the Menu key and then select Phone Settings, and then Do not Disturb.
2.Select from the following options in the submenu:
•All: All incoming and outgoing calls will be blocked. This is the same as pressing the DND key.
•By Period: Enable / Disable the block setting.
•Period Time: Block calls during a specified period. (Only available when By Period function is enabled.)
3.Press the Enter key to enter the submenu. Use the up and down navigation keys to enable/disable the call blocking function.
4.If you wish to block calls during a specified period, enable By Period feature.
5.Set the duration in which you want the incoming calls to be blocked. Press the Enter key to save your settings.
Call Waiting Function
You can answer a call while you have another call in progress. When there is an incoming call, you will hear two continuous beeps indicating a second call. You can press the Hold key to switch between the two calls. The function needs to be activated through the web browser.
Checking Voice Messages
You need to set a voice message code before using the voice mail function. After the code has been set, you can listen to your personal voice message by pressing the Voice MSG key. (ITSP or IP PBX is required for this function.)
15