UNICOM Electric GEP-5300TF-C, GEP-5400TF-C specifications Product Specifications, Introduction

Product Specifications

Standard Compliance:	IEEE 802.3 10/100/1000Base-T Gigabit Ethernet
	IEEE 802.3 1000Base-SX/LX Gigabit Ethernet
Protocol:	CSMA/CD
Interface:	(1) 10/100/1000Base-T, Shielded RJ-45 Jack
	(1) 1000Base-SX/LX, Dual SC connector
Cable distance:	10/100/1000Base-T
	Cat. 5e or 6: up to 100m.
	1000Base-SX: Multi-mode fiber
	50/125µm (550m)
	62.5/125µm (550m)
	1000Base-LX: Single Mode fiber
	9/125µm (10Km)
LED Indicators:	Power, Speed, Link/Activity (copper and fiber),
	Full-Duplex (copper), Full-Duplex/collision (fiber)
Power Supply:	External power adapter 9V DC/700mA (min.)
Operating Temperature:	0˚C to 45˚C
Operating Humidity:	10% - 90% RH
EMI:	FCC Class A, CE Mark
Enclosure:	Metal
Dimensions:	120mm x 85mm x 26mm (L x W x H)
Warranty:	Limited Lifetime

FCC Statement

This equipment has been tested and found to comply with the limits for a class B device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case, the user will be required to correct the interference at the user’s expense.

Introduction

Congratulations on purchasing a quality UNICOM product.

Unicom’s VELOCITY Series represents the newest, most advanced generation of signal conversion technology.

Unicom’s Giga Fiber Converter is a cost- effective solution for the conversion of 10/100/1000Base-T (Auto MDI/MDIX) and pure 1000 Base-T to 1000Base-SX/LX cabling. It can be slotted into a multi- converter chassis that enhances your network flexibility. It can also be used as a stand-alone converter.

The Giga Fiber Converter will allow you to extend the cabling distance of your 10/100/1000Base-T (Auto MDI/MDIX) or pure 1000 Base-T network up to 550m for multi-mode fiber or 10 kilometers for single- mode fiber. This Converter uses the most popular fiber cabling connectors: SC multi- mode fiber connector and SC single-mode fiber connector.

The Modular Giga Fiber Converters provides one Fiber connector for fiber optic cable and one Ethernet RJ-45 port (Auto MDI/MDIX) for 10/100/1000Base-T copper cable or pure 1000 Base-T copper cable connections. There are DIP- switches to set the operation mode for UTP, Fiber ports and link lost forwarding function.

9 2