Battery installation & charging
After installing the battery, you may be able to make or receive short calls. For best performance, place the handset in the telephone base or charger to charge for 16 hours before use.
You can keep the battery charged by returning the handset to the telephone base or charger after use. When the battery is fully depleted, a recharge takes about 12 hours. The average talk time on a fully charged battery is about five hours, and the standby time is approximately six days. Actual battery life depends on usage conditions and age of battery.
|
| 1. | Insert the plug as indicated. Be sure to | |
|
|
| securely insert the plug, making sure that | |
|
|
| it matches the | |
|
|
| battery compartment. | |
|
| 2. | Place the battery and wires inside the com- | |
2 | 3 |
| partment. | |
3. | Slide the battery compartment cover up until | |||
|
it clicks.
1 
NOTE: Under normal conditions, the bat- tery should last around one year. This may vary depending on usage.
Caution: Use only the supplied rechargeable battery, replacement battery 2422 (SKU 23402, part
number
Choose a central location close to a telephone jack and a power outlet not connected to a wall switch. The telephone base can be placed on a flat sur- face or mounted on a standard wall plate. For optimum range and better reception, place the telephone base in a high and open location.
Avoid placing the telephone base too close to:
•Communication devices such as: personal computers, computer routers, tel- evision sets, VCRs, wireless routers (wireless broadband,
•Excessive heat sources.
•Noise sources such as a window with traffic outside, motors, microwave ovens, refrigerators, or fluorescent lighting.
•Excessive dust sources such as a workshop or garage.
•Excessive moisture.
•Extremely low temperature.
•Mechanical vibration or shock such as on top of the washing machine or work bench.