Samsung SP-C700R Adjusting the Flash Time, Ring type Call Restriction Cancel Ring volume High

Page 17

HelpFunctions

HelpFunctions

This is to initialize the phone to its original condition.

When there is a lot of noise, or when the call has a bad

Noise Reduction (Using a Remote Set )

12

Initializing the Phone (Base Set / Remote Set )

1

2

3

4

5

connection, you can use this function to reduce irrelevant noise by changing channels.

�

When there is	Press	button
a lot of noise

∙If the noise is not reduced, press the button several times.

Base Set in standby mode

� �

�

Displaying

�

: Initialization set

All functions will be

�initialized with a completion sound.

Out of Range warning with the Remote Set

�

: Initializationcancelled Press

button on the top.

This prevents a remote set from being disconnected from the base set.

1	2
�	You will see a	on the top
	of the screen with a warning sound.
When the remote set gets	When this occurs, move closer
too far from the Base set	toward the base set.

Remote Set in standby mode

Press the three buttons at the same time and hold for at least 3 seconds.

All functions will be initialized with a completion sound.

When the battery voltage of the remote set falls below a certain level, a warning is given.

Low Voltage Warning in Remote Set

12

		�	You will hear a warning sound with
	When a battery		these	marks blinking.
	needs recharging

When this occurs, immediately recharge your remote set.

Default or Initial State

features

of the Phone

Convenient

Base Set

Remote Set

● Ring type : 1

● Ring type : 1

● Call Restriction : Cancel

● Ring volume : High

Adjusting the Flash Time

You can adjust the flash	1	2	3	4	5
time.			Displaying
			Displaying
	�	�	�		�

�Press button to select the flash time you want.

● You can select the range of the flash time from 0.1 to 1.0 seconds.

You will hear a beep confirming the completion of the setting.

● Morning call / alarm time : 06:00				● Phone volume : Medium

● Ring volume : Medium				● Recently number : None

● Phone volume : Low				● Phone directory : None

● Recently number : None				● Date / Time : 01/ 01 24:00


● Phone directory : None

● Current time : 24:00

● Dial mode : Pulse

● Flash time : 100ms

31

32

Image 17

Contents English Manual Use only the designated adapter When you see this sign, it indicates a warningDo not pour water or any liquid on the phone Do not dispose batteries into a fireSetting function Morning call / alarm FunctionRecent call function Intercom functionTable of Contents Call Screen Preparation & InstallationInstallation Installing the Base SetInstalling the Remote Set Basicic Featurestures Basic FeaturesSetting up with the Remote Set Basic featuresSetting up the Base Set To cancel the transferring, simply pick up the handset How to transfer from toCalling from to Base Set While talkingBase Set Selecting the Ringing Melody Transferring from toRemote set Remote Set While talking DisplayingDoing so, you can switch the volume to high, or low Setting the Time on the Base SetDoing so, you can switch the volume to high, medium or low Remote Set Selecting the Ringing MelodyTo cancel the deleting, simply press Button Searching the Phone Directory Using the Base SetYou can register up to 20 phone numbers on the base set Enter the phone numberSearching the Phone Directory Using the Remote Set Registering a Phone Number Using the Remote SetMaking a Call from the Phone Directory Using the Remote Set You can register up to 10 phone numbers in the remote setTo Delete the Recently Dialed Number Convenient features for making callsTo Redial a Number See page 31 for selecting the flash time When you pick up the handset When you press the buttonRing type Call Restriction Cancel Ring volume High Adjusting the Flash TimeReferenceeference When I press Button Cannot hear the tone Morning call/alarmHear many noises while Using the remote set ※ See page 33 for registering a remote setDimension WeightModel name SP- C700R Classification Unit Remote Set Base Set ChargerMemo Memo