Samsung SP-C700R manual Installing the Base Set, Installing the Remote Set, Installation

Page 6

Phone Installation

Installing the Base Set

DC 12V 500mA

When you have finished installing the base set, pressOn Hook button and check for a dial tone.

If you cannot hear a dial tone, then check both the power and phone line connections.

This product works for 220V.

Installing theRemote Set

DC 12V 500mA

Place the remote set on the charger and check if the lamplight is on.

Press the call button and check for a dial tone.

If you cannot hear the tone, check the installation.

To turn on / off the power

To turn on the power: Press

button (hold for more than 2 seconds) until

you begin to hear the beeping sound.

 

If it does not turn on when you press

button, then you probably

need to recharge the remote set. It should then automatically turn on. Please recharge the battery for 24 hours before using it.

If you do not charge the battery for at least 6 hours, then in order to protect it, the battery must be fully charged or it will stop operating.

To turn off the power: Press buttons (hold for more than 3 seconds) until

Connect the phone line.

Connect the power plug to 220V.

Connect the power plug to 220V.

Loading the battery to the remote set

 

Installation&

Open the

Place the

Rearrange the

Close the

1 battery cover.

2 battery as

3 line by setting

4 battery cover.

Preparation

 

shown in the

the battery as

 

 

picture.

shown in the

 

 

 

picture.

 

 

 

 

 

How to use the battery

Charge the battery for approximately 24 hours before using.

Always remove the battery from the remote set, when you are not using it for an extended period.

It is best to charge the battery until you see

the ( ) sign on the screen.

Battery life

The battery life has a 6-month warranty after

purchase.

As time goes by, there will be a reduction in the battery's power. When battery's power capacity is reduced by half, purchase a new battery and replace it.

Please contact your local Samsung Electronics Service Center on how to purchase and replace the battery.

9

you hear the beeping sound.

10

Image 6
Contents English Manual Do not pour water or any liquid on the phone When you see this sign, it indicates a warningUse only the designated adapter Do not dispose batteries into a fireRecent call function Morning call / alarm FunctionSetting function Intercom functionTable of Contents Preparation & Installation Call ScreenInstalling the Base Set Installing the Remote SetInstallation Basicic Featurestures Features BasicBasic features Setting up the Base SetSetting up with the Remote Set Calling from to How to transfer from toTo cancel the transferring, simply pick up the handset Base Set While talkingRemote set Remote Set While talking Transferring from toBase Set Selecting the Ringing Melody DisplayingDoing so, you can switch the volume to high, medium or low Setting the Time on the Base SetDoing so, you can switch the volume to high, or low Remote Set Selecting the Ringing MelodyYou can register up to 20 phone numbers on the base set Searching the Phone Directory Using the Base SetTo cancel the deleting, simply press Button Enter the phone numberMaking a Call from the Phone Directory Using the Remote Set Registering a Phone Number Using the Remote SetSearching the Phone Directory Using the Remote Set You can register up to 10 phone numbers in the remote setConvenient features for making calls To Redial a NumberTo Delete the Recently Dialed Number When you pick up the handset When you press the button See page 31 for selecting the flash timeAdjusting the Flash Time Ring type Call Restriction Cancel Ring volume HighReferenceeference Hear many noises while Using the remote set Cannot hear the tone Morning call/alarmWhen I press Button ※ See page 33 for registering a remote setModel name SP- C700R WeightDimension Classification Unit Remote Set Base Set ChargerMemo Memo