To remove the battery, turn the radio off. Move the battery latch into unlock position and hold, and slide the battery down and off the rails.
Battery Latch
Attaching the Antenna
With the radio turned off, set the antenna in its receptacle and turn clockwise.
Attaching the Belt Clip
Align the grooves on the clip with those on the battery and press downward until you hear a click.
To remove the clip, press the belt clip tab away from the battery using a key. Then slide the clip upward and away from the radio.
Attaching the Universal Connector Cover
The universal connector is located on the antenna side of the radio. It is used to connect MOTOTRBO accessories to the radio.
Preparing Your Radio for Use
To remove the antenna, turn the antenna counterclockwise. Make sure you turn off the radio and remove the
universal connector cover first.
If antenna needs to be replaced, ensure that only
! MOTOTRBO antennas are used. Neglecting this will damage your radio. See Antennas on page 25 for a list of available antennas.
Universal
Connector
Cover
Place the universal connector cover loop over the attached antenna. Slide it all the way down to the base of the antenna.
Insert the hooked end of the cover into the slots above the universal connector.
3
English