Starting and Stopping Scan
Procedure:
1Press the programmed Scan button.
OR
Use the Channel Selector Knob to select a channel with Auto Scan enabled.
2When Scan is enabled, the LED blinks yellow and you hear a positive indicator tone.
OR
When Scan is disabled, the LED turns off and you hear a negative indicator tone.
Responding to a Transmission During a Scan
During scanning, your radio stops on a channel/group where activity is detected. The radio stays on that channel for a programmed time period known as “hang time”.
Procedure:
1Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
If the Channel Free Indication feature is enabled, you
will hear a short alert tone the moment the transmitting radio releases the PTT button, indicating the channel is free for you to respond.
2 Press the PTT button during hang time. The LED lights up solid green.
3 | Wait for the Talk Permit Tone to finish (if enabled) and speak | Advanced | |
| |||
| clearly into the microphone. |
| |
4 | Release the PTT button to listen. |
| |
5 | If you do not respond within the hang time, the radio returns |
| |
| to scanning other channels/groups. | Features | |
Deleting a Nuisance Channel | |||
|
If a channel continually generates unwanted calls or noise (termed a “nuisance” channel), you can temporarily remove the unwanted channel from the scan list.
This capability does not apply to the channel designated as the Selected Channel.
Procedure:
1When your radio “locks on to” an unwanted or nuisance channel, press the programmed Nuisance Channel Delete button until you hear a tone.
2Release the Nuisance Channel Delete button. The nuisance channel is deleted.
17
English