Motorola XPR 6350 manual Powering Up the Radio, Adjusting the Volume

Page 12

Preparing Your Radio for Use

4

Press downward on the cover to seat the lower tab properly into the RF connector.

Turn the thumbscrew clockwise to secure the connector cover to the radio.

To remove the universal connector cover, press down on the cover and turn the thumbscrew counterclockwise. Lift the cover up, slide the connector cover loop upwards, and remove it from the attached antenna.

Powering Up the Radio

Rotate the On/Off/Volume Control Knob clockwise until you hear a click. The LED blinks green.

A brief tone sounds, indicating that the power up test is successful.

NOTE: There is no power up tone if the radio tones/alerts function is disabled (see Turning

Radio Tones/ Alerts On or Off on page 24).

If your radio does not power up, check your battery. Make sure that it is charged and properly attached. If your radio still does not power up, contact your dealer.

To turn off the radio, rotate this knob counterclockwise until you hear a click.

Adjusting the Volume

To increase the volume, turn the On/

Off/Volume Control

Knob clockwise.

To decrease the volume, turn this knob counterclockwise.

English

Image 12

Contents Page Page Declaration of Conformity Declaration of ConformityDeclaration of Conformity Contents ContentsBatteries and Chargers Warranty Limited Warranty Responding to a Transmission DuringImportant Safety Information Important Safety InformationSoftware Version Computer Software Copyrights Computer Software CopyrightsHow to Use This Guide What Your Dealer/System Administrator Can Tell YouGetting Started Charging the Battery Attaching the BatteryPreparing Your Radio for Use Preparing Your Radio for UseAttaching the Universal Connector Cover Attaching the AntennaAttaching the Belt Clip Powering Up the Radio Adjusting the VolumeRadio Controls You Will Be Using Identifying Radio ControlsIdentifying Radio Controls Assignable Settings or Utility Functions Programmable Buttons Assignable Radio Functions Switching Between Analog and Digital Mode Push-To-Talk PTT ButtonIdentifying Status Indicators Identifying Status IndicatorsLED Indicator Audio TonesIndicator Tones Receiving and Making CallsReceiving and Making Calls Selecting a ZoneSelecting a Radio Channel, Subscriber ID, or Group ID Receiving and Responding to a Radio Call Receiving and Responding to a Group Call Receiving and Responding to a Private CallMaking a Radio Call Receiving an All Call Making a Call with the Channel Selector Knob Making a Private Call Talkaround Monitoring a Channel Permanent MonitorAdvanced Features Advanced FeaturesScan Lists Scan Starting and Stopping Scan Responding to a Transmission During a Scan Deleting a Nuisance Channel Call Indicator Settings Call Alert Operation Sending an Emergency Alarm Emergency Operation Sending an Emergency Alarm with Call Sending an Emergency Alarm with Voice to Follow Reinitiating an Emergency Mode Exiting an Emergency ModeText Messaging Features Privacy Sending a Quick Text Message Setting the Squelch Level Setting the Power LevelUtilities Turning the Option Board Features On or Off Checking the Battery Strength Turning Radio Tones/Alerts On or Off Accessories AntennasBatteries Carry DevicesHeadsets and Headset Accessories ChargersEarbuds and Earpieces Accessories Surveillance AccessoriesRemote Speaker Microphones Miscellaneous Accessories AccessoriesEnglish Batteries and Chargers Warranty Chargers WarrantyWorkmanship Warranty Capacity WarrantyLimited Warranty Limited WarrantyWarranty VII. Governing LAW XPR Series Digital Portable Radios Quick Reference Card 6880309T14-CAudio Indicators for Programmable Buttons Privacy Page Page 6880309T27