VTech CS6114 user manual Home area code, Dial mode, Website

Page 13

Telephone settings

Home area code

If you dial local calls using only seven digits (area code not required), you can program your home area code so that when you receive a call within your local area, the telephone number is automatically stored in the call log

without the area code.

To change the setting:

1.Press MENU/SELECT when the handset is not in use.

2.Press CID or until the screen displays Settings, then press MENU/SELECT.

3.Press CID or until the screen displays

Home area code, then press MENU/SELECT. The screen displays the currently stored home area code.

4.Use the dialing keys (0-9) to enter the desired home area code.

Press MUTE/DELETE to delete a digit.

Press and hold MUTE/DELETE to delete all digits.

Home area code

Home area code

___

5.Press MENU/SELECT to confirm. You hear a confirmation tone.

If, in the future, your telephone service provider requires you to dial the area code when making a local call, or, if you move to a location that requires it, delete the home area code you have already programmed following the steps above. After you have deleted the home area code,

___ appears.

Dial mode

If you have touch-tone service, the telephone is ready to use as soon as the battery is charged. If you have pulse (rotary) service, you need to change the dial mode to pulse dialing.

To change the setting:

1.Press MENU/SELECT when the handset is not in use.

2.Press CID or until the screen displays Settings, then press MENU/SELECT.

3.Press CID or until the screen displays Dial mode, then press MENU/SELECT.

4.Press CID or to choose Tone or Pulse, then press MENU/SELECT to confirm your selection. You hear a confirmation tone.

Website

Use this feature to view the VTech website address.

1.Press MENU/SELECT when the handset is not in use.

2.Press CID or until the screen displays Website, then press MENU/SELECT. The screen displays the VTech website address.

10

Image 13
Contents Online user’s manual Congratulations Table of contents Getting started Parts checklistWall mounting Telephone base installationCharge Battery installationTelephone base layout Battery chargingCID/VOL Handset layoutMENU/SELECT Using the menu Telephone settingsRinger volume Ringer toneTo manually turn off these indicators To change the settingLCD language Clear voicemailSet date and time Key toneHome area code Dial modeWebsite Telephone operation Temporary tone dialing Temporary ringer silencingFind handset Redial list Chain dialingReview the redial list Delete a redial entry Dial a redial entryDirectory Add a directory entry Review the directory Character chartTo search the directory Dial a directory entry Alphabetical searchEdit a directory entry To start an alphabetical searchAbout caller ID Delete a directory entryInformation about caller ID with call waiting Call log Missed call indicatorReview the call log Memory matchView dialing options Save a call log entry to the directory Dial a call log numberCall log display screen messages Delete the call log entriesDisplay screen messages AppendixHandset light Handset and telephone base indicatorsTelephone base light Handset screen iconsBattery needs charging when BatteryLow battery shows on the handset screen TroubleshootingMy telephone does not work at all There is no dial toneCharge light is off Telephone does not ring when there is an incoming callMy handset beeps and is not performing normally My caller ID features are not working properly Hear other calls when using the telephoneHear noise on the cordless handset and the keys do not work Cannot retrieve voicemail messages Out of range or no pwr at base shows on the handset screenCommon cure for electronic equipment Important safety instructions Maintenance Precautions for users of implanted cardiac pacemakersOperating range Rbrc seal About cordless telephonesWhat does this limited warranty cover? WarrantyFCC Part FCC Part 68 and Acta Technical specifications Index Index
Related manuals
Manual 43 pages 52.51 Kb