VTech CS6114 user manual Troubleshooting, My telephone does not work at all, There is no dial tone

Page 29

Appendix

Troubleshooting

If you have difficulty with your telephone, please try the suggestions below. For customer service, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.

My telephone does not work at all.

Make sure the battery is installed and charged correctly (pages 3 and 4). For optimum daily performance, return the handset to the telephone base after use.

Make sure the power adapter is securely plugged into an outlet not controlled by a wall switch.

Make sure the telephone line cord is plugged firmly into the telephone base and the wall jack.

Unplug the electrical power to the telephone base. Wait for approximately 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to synchronize.

Charge the battery in the handset for up to 16 hours.

If the battery is completely depleted, it may take up to 30 minutes to charge the handset before Low battery appears on the screen (page 4).

Remove and install the battery again. If that still does not work, it may be necessary to purchase a new battery.

Disconnect the telephone base from the telephone wall jack and plug in a working telephone. If the other telephone does not work, the problem is probably in the wiring or the local telephone service. Contact your telephone service provider.

There is no dial tone.

First, try all the above suggestions.

Move the handset closer to the telephone base. It may be out of range.

The telephone line cord may be defective. Install a new telephone line cord.

Disconnect the telephone base from the telephone wall jack and connect a different telephone. If there is no dial tone on this telephone either, the problem is in your wiring or local telephone service. Contact your telephone service provider.

I cannot dial out.

First, try all the above suggestions.

Make sure there is a dial tone before dialing. It is normal if the handset takes a second or two to synchronize with the telephone base before producing a dial tone. Wait an extra second before dialing.

If other telephones in your home are having the same problem, the problem is in the wiring or local telephone service. Contact your telephone service provider (charges may apply).

Eliminate any background noise. Mute the cordless handset before dialing, or dial from another room in your home with less background noise.

Low battery shows on the handset screen.

Place the handset in the telephone base for recharging.

Remove and install the battery again and use it until fully depleted, then charge the handset in the telephone base for up to 16 hours.

If the above measures do not correct the problem, replace the battery.

26

Image 29
Contents Online user’s manual Congratulations Table of contents Getting started Parts checklistWall mounting Telephone base installationCharge Battery installationTelephone base layout Battery chargingCID/VOL Handset layoutMENU/SELECT Using the menu Telephone settingsRinger volume Ringer toneTo manually turn off these indicators To change the settingLCD language Clear voicemailSet date and time Key toneWebsite Dial modeHome area code Telephone operation Find handset Temporary ringer silencingTemporary tone dialing Review the redial list Chain dialingRedial list Directory Dial a redial entryDelete a redial entry Add a directory entry To search the directory Character chartReview the directory Dial a directory entry Alphabetical searchEdit a directory entry To start an alphabetical searchInformation about caller ID with call waiting Delete a directory entryAbout caller ID Call log Missed call indicatorView dialing options Memory matchReview the call log Save a call log entry to the directory Dial a call log numberCall log display screen messages Delete the call log entriesDisplay screen messages AppendixHandset light Handset and telephone base indicatorsTelephone base light Handset screen iconsBattery needs charging when BatteryLow battery shows on the handset screen TroubleshootingMy telephone does not work at all There is no dial toneMy handset beeps and is not performing normally Telephone does not ring when there is an incoming callCharge light is off Hear noise on the cordless handset and the keys do not work Hear other calls when using the telephoneMy caller ID features are not working properly Cannot retrieve voicemail messages Out of range or no pwr at base shows on the handset screenCommon cure for electronic equipment Important safety instructions Operating range Precautions for users of implanted cardiac pacemakersMaintenance Rbrc seal About cordless telephonesWhat does this limited warranty cover? WarrantyFCC Part FCC Part 68 and Acta Technical specifications Index Index
Related manuals
Manual 43 pages 52.51 Kb