Call waiting on the cell line:
•Press 
on the cordless handset or tap FLASH on the telephone base to put the current call on hold and take the new call.
•Press 
on the cordless handset or tap FLASH on the telephone base at any time to switch back and forth between calls.
Temporary ringer silencing
When the telephone is ringing, you can temporarily silence the telephone base/ handset ringer without disconnecting the call. The next call rings normally at the preset volume.
•To silence the handset ringer, press OFF or MUTE on the handset. 
displays and Ringer muted displays briefly.
•To silence the telephone base ringer, tap MUTE or VOL- on the telephone base. 
displays and Ringer muted displays briefly.
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to
. During a call, press 
on the handset or 
on the telephone base.
2.Use the dialing keys to enter the relevant number. The telephone sends
Find handset
Use this feature to find the system handset.
To start paging:
•Press 
/FIND HANDSET at the bottom of the telephone base. The idle handset rings and displays
Paging 
.
To end paging:
•Press 
/FIND HANDSET at the bottom of the telephone base.
•Press 
, 
, 
, OFF or any dialing key on the cordless handset.
•Place the cordless handset in the telephone base.
• Do not press and hold 
/FIND HANDSET for more than four seconds. It may lead to 
handset deregistration.
Redial list
Each handset stores the last 10 telephone numbers dialed. When there are already 10 entries, the oldest entry is deleted to make room for the new entry.
To review and dial a number from the redial list on the cordless handset:
. Press REDIAL when the handset is not in use.
2.Press 
, 
or REDIAL repeatedly until the desired entry displays.
3.Press 
, 
or 
to dial.
To delete a redial entry on the cordless handset:
When the desired redial entry displays, press DELETE.
Join a call in progress
You can use the telephone base and the cordless handset, or two cordless handsets at a time on a home line call. You can buy additional expansion handsets
•When a device is on a home line call, press 
or 
on another cordless handset, or press 
on the telephone base to join the call.
•To exit the call, press OFF on the cordless handset or place it on the telephone base, or press 
on the telephone base. The call continues until all devices
hang up.
Transfer a call
While on an outside call, you can transfer the call from one handset to another system device. You can only use the handset to transfer a call.
. During a call, press MENU.
2.Press 
or 
to scroll to 
Transfer, then press SELECT. When you have more than one handset, use the dialing keys to enter a destination device number (7 for the telephone base, or 1 to 5 for HANDSET 1 to HANDSET 5).
3.To answer the call on the telephone base, press 
, 
or any dialing key.
To answer the call on the cordless handset, press 
, 
, 
or any dialing key.