Installation
Telephone base installation
It is recommended to install the telephone base away from any electronic equipment and appliances such as personal computers, computer routers, television sets, microwave ovens, and refrigerators. Avoid excessive heat, cold, dust or moisture. When a location is selected, install the telephone base and the charger as shown below.
•Plug the connector into the power jack at the bottom of the telephone base. Route cords through slots and plug the power adapter into an electrical outlet not controlled by a wall switch.
•Plug one end of the telephone line cord into the telephone line jack at the bottom of the telephone base. Route the telephone line cord through slot, then plug the other end of the cord into the modular wall telephone outlet.
Plug the telephone line cord into a telephone jack.
Plug power adapter into an electrical outlet not controlled by a wall switch.
•Use only the VTech battery and AC power adapter (or equivalent) supplied with this telephone.
To obtain a replacement, visit our website at www.vtechphones. com or call
1(800)
1(800)
•This power unit is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling,
Installation
Basic operation
www.vtechphones.com