Installation
Wall mounting bracket installation (optional)
Your telephone base comes with the wedge installed, ready for desktop use. If you prefer to mount your telephone on the wall (optional), it is designed to mount on a standard telephone wall plate. For wall mounting, follow these instructions:
• First, insert the lower portion tabs of the wall mounting bracket into the lower grooves in the telephone base, then snap the upper portion tabs of the wall mounting bracket into place.
• Mount the telephone base on the wall by positioning it so the mounting studs will fit into the holes on the telephone base and wall mounting bracket. Slide the telephone base down on the mounting studs until it locks into place.
• To remove the bracket, press both upper portion tabs firmly inward and pull the bracket downward until it release from the grooves.
lower portion tab
lower grooves
Desk/table bracket installation
To place your telephone base on a desk or table, insert the wall mounting/desktop bracket.
•Insert the lower portion tabs of the bracket into the upper grooves of the telephone base.
•Snap the upper portion tabs of the bracket into place.
•To remove the bracket, press both upper portion tabs firmly inward and pull the bracket upward until it is released from the grooves.
www.vtechphones.com