Telephone Operation
Clear Message Waiting Alert
If after you review your message(s) your message waiting alert does not go off, you may manually turn it off by:
1.Press PROG.
2.Press 
or 
until screen displays MESSAGE WAITING.
3.Press SELECT, the screen displays:
CLEAR? YES
4.Press 
or 
to select YES or NO.
5.Press SELECT to choose the desired setting. You’ll hear a confirmation tone.
Call Transfer
An external call can be forwarded from one handset (HS1) to the other handset (HS2) by following these steps:
1. While on a call, press SELECT on HS1 to forward the call to HS2. |
|
HS1 will show: | HS2 will ring and show: |
CALL TRANSFERRED | TRANSFERRED CALL |
2. Press PHONE on HS2 to answer the forwarded call. HS1 will return to the idle mode.
•Only one handset can be on a call at a time. For example, if HS1 is on a call and HS2 presses PHONE,
CAN’T CONNECT will display.
•If the HS2 cannot be found, HS1 will generate a sad tone and continue the call automatically. Before HS2 answers, HS1 can press PHONE to cancel the forward function and continue the external call.
• I f H S 2 d o e s n ’ t respond within 30 seconds, HS1 will start ringing until PHONE is pressed t o p i c k u p t h e returned call. If it is not answered within another 30 seconds, the external call will end automatically.
Basic Operation
www.vtechphones.com | BASIC OPERATION 15 |