Setup
Connecting to Phone Line
Plug one end of the telephone line cord into the jack on the bottom of the base unit. Plug the other end of this cord into the wall jack.
Checking for Dial Tone
After the battery is charged, press /FLASH (on) on the
handset. The Phone icon will appear on the handset display, and you will hear dial tone. If not, see In Case of
Difficulty.
CAUTION: Use only the VTech power supply provided with your telephone.
IMPORTANT! FOR MAXIMUM PERFORMANCE OF YOUR CORDLESS TELEPHONE SYSTEM:
1.Choose a central location for your base unit.
2.Install your base unit and accessory handsets
away from electronic equipment, such as personal computers, television sets and microwave ovens.
3. In locations where there are multiple cordless telephones, separate base units as much as possible.
4.Install your telephone equipment away from heat sources and sunlight.
5.Avoid excessive moisture, dust or extreme cold.
Getting Started
9