Telephone Operation
Basic Operation
Answer a Call Press any key except OFF.
Hold
Press to put a call on hold. Press again to release hold.
OR
Lift the Handset of an extension.
Make a Call
Press PHONE, then dial the number.
OR
Dial the number (use 
to backspace and cor- rect digits), then press PHONE to call.
Flash/Call Waiting
If you have Call Waiting service, you will hear a beep if someone calls while you are on a call. Press PHONE/FLASH to put your current call on hold and take the new call. Press this button at any time to switch be- tween calls.
Channel
Switch to a clear channel while on a call.
Delete
While Handset is idle, press and hold to delete all records in Call Log.
When viewing the Call Log, press to delete the current record dis- played.
Handset Volume
Adjust the volume while on a call. A double beep will sound when you reach the maximum or mini- mum setting.
DIR
Press DIR when phone is not in use to display phonebook en- tries. While entering letters, press to advance cusor.
CID
Press CID when phone is not in use to display caller ID infor- mation. When entering num- bers or letters, press to delete last character entered.
Select
Use SEL in conjunction with PROG during Handset pro- gramming.
End a Call
Press OFF
OR
Place Handset
in Base.
Exit
Programming
Cancel a page
Redial
Press PHONE, then press RE- DIAL/PAUSE to call the last num- ber dialed (up to 32 digits).
OR
Press REDIAL/PAUSE, then press PHONE tothecalllastnum- ber dialed.
Press REDIAL/PAUSE twice to delete the last number dialed record with Handset idle.
Pause
Press REDIAL/PAUSE to inset a dialing pause when enter num- bers.
Program
Enter programming mode with Handset idle (on hook).
10