VTech T2447 user manual Installation, Before You Install

Page 8

Installation

Before You Install

1.Choose a location for the Base near an electrical outlet and a telephone jack. This phone requires a modular telephone jack and a standard electri- cal outlet (110V AC) not controlled by a wall switch.

2.Install the Handset battery. Use only VTech batteries.

a) Remove battery compartment cover by pressing on the indentation and slid- ing downward.

b) Align the two holes in the plug with the socket pins, then snap the plug into place.

c)Place the battery in the compartment with

the wires in the lower right corner. Angle the top of the battery under the top claws first, then snap the bottom of the battery in. Place the wires under the guide, located below the battery.

d)Replace battery compartment cover.

3.Plug the DC connectors to the Base. Plug the AC adaptors into an electrical outlet. Connect the telephone line cord to the jack on the Base, and the other end to a modular telephone jack, as illustrated on the next page.

4.Place the Handset in the Base. Charge the battery for 10-12 hours.

Getting Started

7

Image 8

Contents USER’S Manual t2447 Important Safety Instructions Important Safety Instructions Before You Begin Parts Check List Handset Layout Base Unit Layout Installation Before You InstallTable/Desk Installation Connect Power cordLine cord Check for Dial ToneWall Mounting Telephone Operation Basic OperationUse/Charging Handset Ringer Style/Battery Save Set Dial ModeSet Language Temporary Tone DialingBattery needs to be recharged Display Screen MessagesThere is a call coming Handset is waiting for a dial toneSpeed Dial Store a Number/Name in MemoryDial a Speed Dial Entry Edit a Number/Name Stored in MemoryDelete a Number/Name Stored in Memory Reassign Locations in Memory Telephone Directory Store a Number/Name in the DirectoryEdit a Number/Name Stored in the Directory Delete a Number/Name Stored in the DirectoryMove a Number/Name to Speed Dial Memory Dial a Number from the DirectoryCaller ID Operation About Call History Caller IDReview Call History Delete Records from Call HistoryDial a Displayed Number Store a Call History Record in the DirectoryAudible Indicators Setting the ClockAnswering System Operation About MailboxesTo Delete Your Announcement Record Your AnnouncementTo Review Your Announcement at Any Time Setting Up Your Answering System Feature SummaryListen to, Save & Delete Messages Repeat/Slow MessagesPlay Messages Delete MessagesMessage Window Display Call Screening/InterceptRecord a Memo Voice Menu Remote Access CommandsConnect with the Answering System From a Remote Location Function Batteries Battery Care and MaintenanceReplacing the Handset Battery Headset Operation Belt ClipHandset does not ring when you receive a call You hear other calls while using your phoneCase of Difficulty Phone doesn’t work at allCommon cure for electronic equipment Your answering system is not recording messagesYou cannot hear recorded messages CL is flashing in the Base Message Window DisplayMaintenance Warranty Statement What does this limited warranty cover?How long is the limited warranty period? What is not covered by this limited warranty?How do you get warranty service? Other LimitationsWarranty Statement FCC, Acta and IC Regulations FCC PartFCC Part 68 and Acta VTech Communications, IncRights of the telephone company IC Industry Canada FCC, Acta and IC Regulations Rbrc Seal Technical Specifications Nominal Effective RangeTable Of Contents Additional Information Issued Replacement Battery Order Form QTY