Getting started
Changeable handset bracket
Your telephone comes with two additional handset brackets. If desired, change it to suit your mood or match your room decor.
To remove the handset bracket:
1.Remove the handset image card and the clear plastic cover, if any. See To remove the handset image card on page 7 for removal instruction. Otherwise, go to step 2.
2.Remove the battery compartment cover, if any. Press down firmly on the top center of the battery compartment cover and slide downwards to detach from the handset.
3.Pull out the large tabs on both ends of the handset bracket away from the slots on the handset, see Figure 1.
4.Pull the handset bracket away from the handset so that its small tabs release from the slots of the handset, see Figure 2.
5.Push the handset bracket up to remove it from the handset, see Figure 3.
Figure 1 | Figure 2 | Figure 3 |
To install a handset bracket:
1.Choose a desired handset bracket.
2.Align the handset bracket against the handset so that the top of the handset bracket rests on the charge light of the handset, see Figure 4.
3.Make sure the large tabs on the handset bracket are facing up. Slide the handset bracket down onto the top of the handset, see Figure 5.
4.Press the small tabs down into the slots on both sides of the handset until they lock into place securely, see Figure 6.
5.Press the large tabs on both sides of the handset bracket into the slots on the handset, see Figure 7.
Figure 4 | Figure 5 | Figure 6 | Figure 7 |