VTech 2458 Connect to phone line, Checking for dial tone, Case of Difficulty

Page 4

Getting Started

Setup

CAUTION: To reduce the risk of fire or injury, read and follow these instructions:

1.Use only the Vtech battery supplied or equivalent.

2.Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.

3.Exercise care in handling batteries in order not to short the battery with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause burns.

4.Do not dispose of the battery in a fire. The cell may explode.

Connect to phone line

Plug one end of the telephone line cord into the jack on the bottom of the Base Unit. Plug the other end of this cord into the wall jack.

Checking for dial tone

After the battery pack is charged, pick up the Handset and press the PHONE key. The IN USE indicator should light up, and you should hear a dial tone; if not, see

IN CASE OF DIFFICULTY.

Tone/Pulse Selection

See OPERATING INSTRUCTIONS for details.

CAUTION: Use only the Vtech power supply provided with your telephone.

IMPORTANT:

For best performance the VT2458 should be installed as follows:

In an elevated location, in the center of the room, with no obstructions nearby.

In a location that is away from other electrical appliances such as microwave ovens, personal computers, or televisions.

4

Image 4

Contents Important Safety Instructions Introduction Parts Check ListSetup Connecting power to Base UnitConnect to phone line Checking for dial toneCase of Difficulty Tone/Pulse Selection See Operating Instructions for detailsHandset Features Base Unit Features Disconnecting Operating InstructionsMaking Calls Answering CallsTONE/PULSE Setting Changing ChannelsProgramming the Ringer Type Press PROG/MEMChecking the Ringer Memory DialingProgramming Speed Dial Numbers Speed Number DialingPress REDIAL/PAUSE Dial Press PROG/MEM Using Redial Storing Pauses in MemoryAnswering System Operation IntroductionHandsetLayoutForAnsweringSystemOperation KEY FunctionAnswering System Setup Set Outgoing MessageSet Security Code Set Audible Message AlertSet Base Ringer Checking and Setting Day and TimeSet Number of Rings Recording a Memo Turning Your Answering System ON/OFFFrom the Base Unit From the HandsetTo Hear Your Outgoing Greeting Press 4 Menu Press 2 PLAY/STOPPlay Previous Message Skip to Next MessageErase Current Message Answering System ON/OFFHeadset Operation To purchase a Headset, call Vtech Customer Service atBelt Clip Maintenance You Hear Other Calls While Using Your Phone Case Of DifficultyPhone Doesnt Work At All No Dial ToneCommon Cure For Electronic Equipment Warranty Statement What does this limited warranty cover?How long is the limited warranty period ? What is not covered by this limited warranty ?How do you get warranty service? Other LimitationsInformation Additional VTech Communications Inc FCC, Acta and IC RegulationsFCC Part FCC and Acta Information Product identifier and REN informationConnection and use with the nationwide telephone network Repair instructionsHearing aid compatibility Programming/testing of emergency numbersIC Industry Canada Rbrc Seal Technical Specifications Member of the Vtech Group of Companies Table of Contents