Getting Started
Wall Mounting
The wall mount brackets are designed for use on standard wall mount plates only. Wall mounting is optional.
1.Plug the adapter into electrical outlets. Then plug the connector of the base power adapter to the connector jack at the bottom of the base unit.
2.Connect the telephone line cord to the jack at the bottom of the base unit, and the other end to the wall jack.
3.Line up the tabs on the wall mount adapters with the holes at the bottom of the base unit. Snap the wall mount bracket firmly in place.
4.Mount the base unit on the wall. Position the base unit so that the mounting studs will fit into the holes on the wall mount bracket. Slide base unit down on the mounting studs until it locks into place.
Power adapter
8