Additional Information
Headset Operation
Your i 5801 cordless Handset is equipped with a 2.5mm Headset Jack for use with an optional accessory Headset for
To purchase a Headset, call VTECH Customer Service at 1-800-595-9511.
Once you have a compatible 2.5mm Headset, locate the Headset Jack on the Handset. Connect the plug on the Headset cord to the jack(covered with a small rubber flap) on the cordless Handset.
The plug should fit securely. Do not force the connection.
NOTE :
Whenever a compatible Headset is connected to the cordless Handset, the microphone on the Handset will be muted. This is done to limit the effect of background noise.
Many compatible Headsets have a reversible, monaural design. You can wear your Headset on either ear, leaving one ear free for room conversation.
Belt Clip
The i 5801 is also equipped with a detachable belt clip. Align the pins on the inside edge of the clip with the notches on the sides of the Handset. The belt clip should snap securely into place. Do not force the connection.
2 6