When the radio detects activity, it stops scanning and you can hear the transmission on that channel. To respond and talk to the person transmitting, press M within 5 seconds.
To stop scanning, briefly press and release J.
Note: If you press M while the radio is scanning, the radio transmits on the channel you selected before you activated scan. If no transmission occurs within 5 seconds, scanning will resume.
Scan Advance
If the radio stops scanning on a channel you do not want to listen to, briefly press and release ] or [ to resume scanning for the next active channel.
Removing Channels from the Scan List (Nuisance Delete Feature)
To prevent the radio from scanning a channel, press and hold ] or [ for at least 3 seconds, then release, when the scan first stops on that channel. This temporarily removes the channel from the scan list. Press J to exit scan mode. Press J a second time to activate scan again. To restore a previously deleted channel, turn the radio off and then back on. The channel is now restored.
Note: You cannot remove your home channel from the scan list. The home channel is the channel your radio was set to when you started scanning.
Special Features
21