Alerts
•To turn talk confirmation off, turn your radio off and then back on while pressing and holding ].
QT Noise Filtering
The QT noise filtering feature helps ensure uninterrupted communication with other Motorola T5700 Series and T5900 Series radios that have this feature. This feature filters out unwanted transmissions from other radios. It is useful in places where there is heavy radio traffic, such as at an amusement park or ski resort.
Note: QT noise filtering is not available while the radio is scanning. To turn QT noise filtering on or off:
1.Press \ until F displays.
2.Press ] or [ until Y displays to turn noise filtering on, or until – displays to turn noise filtering off.
3.Press \ or M to confirm your selection.
To transmit to a radio that has QT noise filtering turned on:
1.Select the same channel and Interference Eliminator Code as the other radio.
2.Press Mor ^ to send a call tone. This allows your voice to pass through the QT noise filter on the receiving radio.
3.Press Mand speak normally.
Note: If you skip step 2 or have your call tone set to 0, the beginning of your message may not be heard on the receiving radio.
26