UseChangingProgrammingthe ScrollthebuttonChannel:to selectSpiritchannelGT+1 orOnly2.
1.Frequency selectionSpiritGT+radioisatwostepprocess:
2.Code selection
Note: The radio will return to operation mode in 10 seconds or after pressing
1SelectedChannel:. Press and hold downFrequencytoathe
button while turning the on, wait for approximately 5 seconds then release the
2.Use Scroll button to select one of the 8 frequencies. Figure 16.
3. On Spirit GT+, press the Monitor button.
4. The current channel will flash, press scroll button to change channel.
5.After the second channel is selected, press Monitor button again, current frequency for second channel will flash. Figure 16.
6.Use Scroll button to select new frequency.
1Exit. Press
2.Allow the Menu time to expire (10 seconds).
3.Press Menu button to go to code programming.
Spirit GT+ users can set different frequency for each channel.