Motorola PM400 manual Home Revert Autokey 1, SET Local or Distance Mode, VOX Operation

GETTING STARTED

HOME REVERT AUTOKEY (1 & 2)

If a Revert Memory Channel is an LTR talkgroup, the Home Revert AutoKey feature automatically keys-up and transmits an MDC PTT ID. If a Revert Memory Channel is programmed as a Conventional channel, the radio will not key-up (see page 17).

SET LOCAL OR DISTANCE MODE

Use this feature between Local mode (low sensitivity) and Distance mode (normal sensitivity). Local mode reduces interference from other radios in close proximity. Distance mode improves the radio’s range.

Press the preprogrammed Local/Distance button (see page 17) to toggle between Local and Distance mode.

VOX OPERATION

When hands-free operation is desired, your radio can transmit by voice alone using the VOX feature when you speak through a voice activated external microphone that is connected to your radio.

26

Note: A voice activated external microphone must be connected to your radio prior to power-up of the radio in order to activate the VOX feature.

To enable or disable VOX operation on a channel/talkgroup, press the preprogrammed VOX button (see page 18).

Note: Pressing the PTT button disables VOX.

– or –

You can select channels/talkgroups to enable or disable VOX as preprogrammed by your dealer/programmer.

1Gor Hto select a channel/talkgroup that has been preprogrammed to enable VOX.

Note: Pressing the PTT button disables VOX.

2Gor Hto select a channel/talkgroup that has not been preprogrammed to disable VOX.

English