Canon H323 manual View Details

4.3 View Details

You can use the following procedure to view a number of phone details. These are in addition to the other static address and local administration options which can also be used to review settings.

1.While the phone is on-hook and idle, press the following sequence: MUTE 8 4 3 9 # (MUTE V I E W #).

∙To display the set of details, press * at any time during viewing.

∙To end the procedure and restore the user interface to its previous state, press #.

2.A sequence of values are displayed. The values available may vary between phone models and the level of IP phone software installed on the phone. To display the next value press *. To exit the information display press #.

∙Model

Shows the phones model number; for example, 4624D02A.

∙Market

Shows 1 for export or 0 for domestic (US). Not displayed on all phone types.

∙Phone SN

Shows the phone's Serial Number.

∙PWB SN

Shows the phone's Printed Wiring Board Serial Number.

∙PWB comcode

Shows the PWB's comcode.

∙MAC address

Shows the phone's MAC address as paired hexadecimal numbers.

∙L2 tagging

Indicates whether L2 tagging is on, off or set to auto.

∙VLAN ID

The VLAN ID used for the phone. The default is 0.

∙IP address

The IP address assigned to the phone.

∙Subnet mask

The subnet mask assigned to the phone.

∙Router

The router address assigned to the phone.

∙File server

The address of the file server assigned to the phone.

∙Call server

The address of the phone's H323 Gatekeeper.

∙802.1X

The current setting for 802.1X operation if being used.

∙Group

This displays the group value set on the phone. Group values can be used to control which options (both firmware and settings) a phone downloads. Refer to the 4600 Series Phones LAN Administrator Guide.

∙Protocol Display Default.

∙filename1

Shows the name of the phone application file in the phone's memory. These are values from within the boot file loaded and not the actual file name.

∙10MBps Ethernet or 100Mbps Ethernet Shows the speed of the detected LAN connection.

∙filename2

Shows the boot file name and level. These are values from within the boot file loaded and not the actual file name.

H323 IP Telephone Installation	Page 56
IP Office Release 6	15-601046 Issue 16a (15 March 2010)