Canon H323 manual QOS Option Settings, Secondary Ethernet Hub/IR Interface Enable/Disable

Page 55

Static Administration Options:

4.1 QOS Option Settings

Administering QoS options is not mandatory, but it is highly recommended. Use the following procedure to set Quality of Service (QoS) options.

1.While the phone is on-hook and idle, press the following sequence: MUTE 7 6 7 # (MUTE Q O S #).

2.The current 802.1Q settings are shown in sequence:

∙L2 audio=

This is the phone's current 802.1 audio parameter. To accept the current value, press # or enter a value (between 0 and 7) and then press #.

∙L2 signaling=

This is the phones 802.1 signaling parameter. To accept the current value, press # or enter a value (between 0 and 7) and then press #.

∙L3 audio=

This is the phone's Differential Services audio parameter. To accept the current value, press # or enter a value (between 0 and 63) and then press #.

∙L3 signaling=

This is the phone's Differential Services signaling parameter. To accept the current value, press # or enter a value (between 0 and 63) and then press #.

3.If no new values were entered during this procedure, No new values is displayed. To end the procedure, press #.

4.If new values were entered during this procedure, Save new values? is displayed. To end the procedure or save the new values, press #. New values being saved is displayed and the phone returns to normal operation.

4.2Secondary Ethernet (Hub)/IR Interface Enable/Disable

Use the following procedure to enable or disable the hub interface found on some H323 IP phones (usually marked with a symbol). The default for the hub interface is enabled.

The same procedure can also be used to enable or disable the IR port found on some H323 IP phones, see Infrared Dialling 66 .

1.While the phone is on-hook and idle, press the following sequence: MUTE 4 6 8 # (MUTE I N T #). The phones port settings are shown in sequence. The option vary between different models of phone.

∙PHY2=

This is the PC connection LAN socket marked as on the phone. Press 1 or 0 to enable or disable the hub interface respectively. To continue, press #.

∙IR=

This is the infrared (IR) port located on the front of some H323 IP phones. Press 1 or 0 to enable or disable the hub interface respectively. To continue, press #.

2.If you changed the setting, If you press #, New values

Save new values? is displayed. To end the procedure or save the new values, press #. being saved is displayed and then returns to normal operation.

H323 IP Telephone Installation

Page 55

IP Office Release 6

15-601046 Issue 16a (15 March 2010)

Page 54 Page 56
Image 55
Page 54 Page 56
Contents IP Office Release H323 IP Telephone InstallationH323 IP Telephone Installation IP Office Release Contents Page Chapter IP Office H323 IP Phones Page ∙ Network Assessment IP Office H323 IP PhonesIP Office Release What is NewIP Office Supported Phones IP Office Unit System CapacityExtension Capacity Call CapacityPhone Firmware Simple Installation Installation Requirements IP500 and IP500 V2 IP Office Systems LicensesOther IP Office Systems ∙ Warning a Network Assessment is Mandatory Network Assessment∙ G711 20ms ∙ G723a 80ms ∙ G729 40ms Call Type Voice Compression Channel Usage Voice CompressionMeasuring Channel Usage Installing VCM Cards10 QoS Potential VoIP ProblemsUser PC Connection ∙ Avaya 1151D1 Power Supply Unit PSU Power Supply OptionsSpare Wire Power Options Dedicated Plug-Top Power Supply Units∙ IP Phone Inline Adaptor 802.3af Power over Ethernet PoE Options∙ Avaya 1152A1 Power Distribution Unit Mid-Span Power Unit ∙ Power of Ethernet POE SwitchFile Server Description Up to File Server OptionsPhones File Auto Generation Control Unit Memory Card Transferring Files Using IP Office ManagerPage Chapter Installation Installation Dhcp Server ∙ o Dhcp ModeIP Phone Software and Settings Files ∙ Secondary Site Specific Option Number IP Office 4.2+Adding Licenses Creating/Editing the Settings File 1600/9600 Series Phone Languages Backup/RestoreLanguage File Manually Creating Extensions Phone Connection ∙ To switch to static address installationStatic Address Installation Phone Registration ∙ Password =∙ Ext. = Phone Security Extension & User SetupSpecifying the Bruri Value Backup RestoreHttp Authentication Manual Backup/Restore ControlABKNUMBERmmm Series Phone Backup FileField Description ABKNAMEmmmSelect Properties Http Server Configuration for Backup/RestoreListing Registered Phones Error Messages Chapter Other Installation Options VPN Remote Phones Other Installation OptionsVPNremote Phone Installation DocumentationSupported VPNremote Phone Firmware Product Section Title Doc ReferenceEnable VPN Phone Allowed Configuring the IP Phone for VPNremoteType Description Advantages Disadvantages Vlan and IP PhonesVlan and Dhcp Option Data Vlan Dhcp Settings Voice Vlan Dhcp SettingsDhcp Option Description HP-Switch Configuration Example setup OverviewPort Vlan Description Voice Data HP Procurve CLI outputOption Value Example System OverviewPort Vlan 209 Voice Vlan 210 Data Page Chapter Static Administration Options ∙ 4601, 4602, 5601, 5602 Speaker key Static Administration OptionsEntering Data for Administrative Options Hold vs MuteSecondary Ethernet Hub/IR Interface Enable/Disable QOS Option SettingsView Details ∙ If self-test passes Self-Test Procedure∙ If self-test fails Resetting a Phone Resetting a PhoneClearing a Phone Setting the Sson on IP Office Setting the Sson on an IP PhoneSite Specific Option Number ∙ Headset AGC = Switching automatic gain control on/offAutomatic Gain Control ∙ Handset AGC =Chapter Restart Scenarios Restart Scenarios Correct Boot File and Application File Already Loaded Boot File Needs UpgradingNo Application File or Application File Needs Upgrading Page Chapter Infrared Dialling ∙ Dial a Number to Start a Call Infrared Dialling∙ Swap Text Files During a Call Windows Pocket PC Enabling the IR PortDialling Phone Numbers Palm OrganizerBeaming Files During a Call Chapter Alternate Dhcp Server Setup Alternate Dhcp Server Setup Checking for Dhcp Using a Windows Dhcp ServerWindows Dhcp Setup for H323 IP Phones Select Start Programs Administrative Tools Dhcp∙ Data type String ∙ Code 2b. Adding a 242 Option2c. Adding a 176 Option Alternate Options Chapter WML Server Setup What WML is Supported WML Server SetupIntroduction Testing 4620 WML Browsing Using XitamiInstalling the Web Server Configuring the Xitami Web Server for WAP4a. Creating a Simple WML Installing Sample WML PagesSET Wmlport Setting the HomeMicrosoft IIS Web Server WML Configuration Apache Web Server WML Configuration∙ Associated extension wml Case 3. Input Box Followed by a Submit Button Open URL EntryCase 1. Input Box Followed by an Anchor Tag Case 2. Input Box Followed by an a TagPage 1719,TFTPSRVR IndexAvpp AddrAscii AsdmDhcp CD/DVDConflict LANWins END of Avaya 4620 IP PhoneEND of File GEN GETIPO LIC VCMLAN1 L2 QOSL2QVLAN MimePWB SN Sson Sson SET Dnssrvr SET DomainSET Smblic SET Wmlcoding Ascii SET Wmlhome SET Wmlport 8000Tftpsrvr 47 URLTftp TftpdirWAP H323 IP Telephone Installation IP Office Release Avaya Inc. All rights reserved
Top Page Image Contents