ArtDio IPC 1000 manual Outbound

Page 12

Configure outbound authentication if SIP proxy server or other SIP phone request for authentication.

1. Click the ADVANCED button to go to the configuration page.

2. Click the SIP	4. Click the “Apply” button to apply any changes
OUTBOUND

3. Enter information for authentication including realm, username, port and password.

Image 12

Contents Voice Internet Phone Gateway Connect the phone to perform basic configurations Configure Region IDPreparation Using a phone to configure the region ID Configure Phone number, IP address and WEB passwordRegion ID is coded as follows Dhcp Mode PPPoE ModeUsing a phone to configure information Page Entering the Web Based Management Interface Using a phone to restart the System Editing Phone book or IP learningEditing Phone Book IP LearningJoin Iipn service Party to press the key twice. Within one secondHow to dial Description Traditional Phone Calls Placing VoIP CallsTransferring it to another IPC 1000 series unit SIP Configuration Outbound SIP Phone Books Placing SIP Calls

OUTBOUND