| Local IPC 1000 series | Remote IPC 1000 series |
1. | Assuming the user makes a traditional phone call through | After a few seconds the phone will begin ringing. (The FXO LED |
| the PSTN to reach a remote IPC 1000 series unit, for | should be flashing) |
| example ”002862164458275” (You will then hear the ring |
|
| back tone). |
|
|
|
|
2. | Waiting for the recipient to answer the phone, ask called | Pick up the phone and press the“ ” key twice, the learning |
| party to press the “ ” key twice. (Within one second) | procedure will begin. |
|
|
|
3. | Waiting for the recipient press the “ ” key twice, the | At this point the user will hear short sounds that should continue |
| learning procedure should then begin. Later you will hear | for about 15 seconds |
| short sounds that should continue for about 15 seconds |
|
|
|
|
4. | If the learning procedure was successful, you will hear three | Confirm that the learning process has completed successfully. |
| short sounds in rapid succession. | You should now be almost ready to commence voice |
|
| communication. |
|
|
|
5. | Hang up the phone to end the IP learning process | Hang up the phone |
| procedure. |
|
|
|
|
| The user can retry dialing a VoIP phone number, for example | The phone should ring. Pick up the phone to begin voice |
“#002862164458275#” | communication over IP. | |
|
|
|
Join IIPN service
Contact your distributor and ask for a IPN service. After connecting to the IPN, you can get an IPN ID and make a VOIP call.
Example: # IPN ID #