7. | 882834# | The numbers ”2834” in this string are the web based management password. |
8. | 981# | Restarts. (The system should be restarted immediately) |
9.Hang up the phone
2. Configure the TCP/IP Properties of the PC connected to the IPC 1000 series unit
You can use a popular browser such as IE or Netscape to perform further configurations. You need to use Ethernet connection to connect a PC to the IPC 1000 series unit and modify the PC’s TCP/IP properties (IP Address and Subnet Mask) so that they are located in the same subnet. You can then use the browser to configure the device.
Click to highlight your
Network Card’s
TCP/IP options.
Click the “Properties”
Fill in the IP Address and Subnet Mask. They must be in the same subnet as the IPC 1000 series unit.