Place a Call from Call History
To place a call to a number in the call history list, use the following method:
1.Use the Navigation button to scroll through the call history list.
2.Use the Select soft key to select a phone number. The digits appear on the phone display.
3.To dial the number as it appears on the phone display:
–Press the Dial soft key.
To edit the number on the phone display before dialing, use the following method:
1.Press the Edit soft key to place the cursor at the beginning of the number on the phone display.
2.Use the keypad to edit the digits as needed. Use the backspace (<<) soft key to erase incorrectly entered digits.
3.Press the Dial soft key to place the call.
Clear Call History
To clear all numbers in the directory histories, press the Clear soft key.
Note The Clear soft key clears all call history lists. Selective clearing of call history lists is not supported.
Use Audio Paging
Audio paging provides a
To use the paging function for paging a group, use the following method:
1.Select an available phone line by lifting the handset. Listen for the dial tone.
2.Dial the designated paging group number.
Each idle IP phone that has been configured with the paging number answers automatically in speakerphone mode, and the phone displays the caller ID.
3.When you finish speaking your message and hang up, the phones are returned to their idle states.
Use the Intercom Feature
Cisco Unified CallManager Express supports intercom functionality for
To use the intercom feature, use the following method:
1.Press the Menu button.
2.Use the Navigation button to select Directories.
3.Use the Navigation button to select Speed Dial.
4.Select intercom Speed Dial.
The called IP phone automatically answers the call in speakerphone mode with mute activated. A beep alerts the recipient to the incoming call.
To respond to an intercom call, press the Mute button, or lift the handset.
15