Cisco Systems OL-8978-02 Ciscoipphone SmartPorts Template, Ciscosoftphone SmartPorts Template

Page 46

Chapter 55 Configuring a VoIP Network

Using SmartPorts

Ciscoipphone SmartPorts Template

The ciscoipphone interface macro command results in the following configuration:

Note Specifying the vlan (nativevlan) is required. Specifying the auxvlan is optional. The port security is set to the maximum of 3 for the IP phone because the phone’s MAC address can appear in both the native and the auxiliary VLAN.

set port macro mod/port ciscoipphone vlan nativevlan auxvlan auxvlan

--------------------------------------------------------------------

set port enable mod/port

set port l2protocol-tunnel mod/port cdp stp vtp dis set port membership mod/port static

set port host mod/port

set spantree bpdu-guard mod/port enable set vlan nativevlan mod/port

set port auxiliaryvlan mod/port auxvlan (set to none if not specified) set port inlinepower mod/port auto (if supported by module)

set cdp enable mod/port

set port security mod/port enable age 2 maximum 3 violation restrict set port qos mod/port autoqos voip ciscoipphone

Ciscosoftphone SmartPorts Template

The ciscosoftphone interface macro command results in the following configuration:

Note Specifying the vlan (nativevlan) is required.

set port macro mod/port ciscosoftphone vlan nativevlan

--------------------------------------------------------------------

set port enable mod/port

set port l2protocol-tunnel mod/port cdp stp vtp dis set port membership mod/port static

set port host mod/port >

set spantree bpdu-guard mod/port enable set vlan nativevlan mod/port

set port auxiliaryvlan mod/port auxvlan none set port inlinepower mod/port auto

set cdp enable mod/port

set port security mod/port enable age 2 maximum 1 violation restrict set port qos mod/port autoqos voip ciscosoftphone

 

Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7

55-46

OL-8978-02

Page 45 Page 47
Image 46
Page 45 Page 47
Contents A P T E R 55-1Cisco IP Phone 55-255-3 55-4 Analog Station Gateway Access GatewaysCisco CallManager 55-5Digital Trunk Gateway FXS Interface FeaturesAnalog Trunk Gateway 55-6Link Management Digital Signal Processing Per T1/E1 PortConverged Voice Gateway 55-7How a Call Is Made 55-8Switch-to-Phone Connections 55-9Set port inlinepower Set inlinepower defaultallocation Voice-Related CLI CommandsCLI Commands Ethernet Module1 WS-X6608-T1/E12 WS-X6624-FXS3 Show port inlinepowerShow environment power Configuring Per-Port Power Management55-11 Show module mod Task Command55-12 Show version mod Power Management Modes55-13 Phone Class Required Power W Power Requirements55-14 Powering Off the Phone Available PowerWall-Powered Phones Phone RemovalHigh-Availability Support Phone Detection Summary55-16 Set port inlinepower mod/port auto static Setting the Power Mode of a Port or a Group of PortsSetting the Default Power Allocation 55-17Show port inlinepower mod /port detail Set inlinepower notify-threshold percentage55-18 Console show port inlinepower 4/1 detail Displaying the Switch Power Environment for ModulesShow environment power mod Console enable show environment powerUnderstanding the Auxiliary VLANs Configuring the Auxiliary VLANs on Catalyst LAN SwitchesEnter the set port auxiliaryvlan mod/port auxvlanid command 55-20Set port auxiliaryvlan mod /ports vlan Auxiliary Vlan Configuration GuidelinesConfiguring the Auxiliary VLANs Untagged dot1p noneKeyword Action Verifying the Auxiliary Vlan ConfigurationDisabling the Auxiliary VLANs Until an IP Phone is Detected 55-22Configuring a Port Voice Interface Configuring the Access Gateways55-23 Show port voice interface mod /port Displaying a Port Voice Interface ConfigurationDisplaying the FDL Statistics Show port voice fdl mod /portField Description Displaying the Port Configuration for the Individual PortsConsole enable show port voice fdl 7/1-3 Show port mod /port55-26 Port T1/E1 Pstn Interface ModuleConsole show port 55-27 Port FXS Analog Interface Module 55-28All call conference transcode ipaddr Displaying the Active Call InformationShow port voice active mod/port 55-29Console show port voice active 55-30Console show port voice active 3/2 Understanding How QoS Works in the Cisco IP Phone Configuring QoS in the Cisco IP Phone55-31 Set port qos mod/ports...trust-ext trusted Configuring QoS in the Cisco IP PhoneSetting the Phone Access Port Trust Mode UntrustedVerifying the Phone Access Port QoS Configuration Configuring a Trusted Boundary to Ensure Port SecuritySetting the Phone Access Port CoS Value 55-33Supported Cisco IP Phones QoS and Cisco IP Phone ConfigurationQoS, Cisco IP Phone, and PC Configuration 55-34Trusted Boundary Configuration Guidelines 55-35Configuring a Trusted Boundary 55-36Verifying a Port’s Trust-Device State Default ConfigurationSpecifying a Cisco IP Phone as the Trust Device 55-37Understanding SmartPorts Macros 55-38SmartPorts-Cisco Softphone SmartPorts-Cisco IP Phone55-39 SmartPorts Guidelines and Restrictions CLI Interface for SmartPorts Command DescriptionCiscoipphone Command Output 55-41Console enable set port macro 3/1 ciscosoftphone vlan Ciscosoftphone Command OutputConsole enable set port macro 3/1 ciscoipphone vlan Detailed SmartPorts StatementsCiscosoftphone Macro Statement How to Use SmartPorts in Your NetworkCiscoipphone Macro Statement Keyword Port TypeCiscorouter SmartPorts Template SmartPorts Enhancements in Software Release55-44 55-45 Ciscoswitch SmartPorts TemplateCiscodesktop SmartPorts Template Set port macro mod/port ciscodesktop vlan vlan55-46 Ciscoipphone SmartPorts TemplateCiscosoftphone SmartPorts Template Set port macro mod/port ciscosoftphone vlan nativevlanOverview Configuring User-Definable SmartPorts MacrosGlobal SmartPorts Template 55-47Creating User-Defined Macros Using the CLI to Configure User-Definable SmartPorts MacrosConsole enable set macro name videophone 55-48Defining Variables Modifying Existing User-Defined Macros55-49 Applying a User-Defined Macro Using Special Variables55-50 Console enable set port macro 3/7 videophone Console enable set port macro 3/2 videophone55-51 Show macro name nameofmacro show macro all Displaying MacrosDisplaying Macro Variables 55-52Clear macro name nameofmacro clear macro all Clearing Macros and Macro Variables55-53 Show macro map all name nameofmacro port mod/port Displaying Macro Port Mappings55-54 Console enable show macro map port 3/2 Configuring a Macro within a Macro55-55 55-56

OL-8978-02 specifications

Cisco Systems OL-8978-02 is a comprehensive training curriculum designed to enhance the skills and knowledge of network professionals seeking to advance their careers in network management and security. This curriculum offers a significant focus on Cisco networking technologies and concepts, ensuring that learners are well-equipped to handle the intricacies of modern network environments.

One of the primary features of OL-8978-02 is its in-depth coverage of foundational networking concepts, which are crucial for effective network administration. The curriculum includes detailed modules on networking fundamentals, such as OSI and TCP/IP models, LAN and WAN architectures, and network protocols. This solid foundation enables learners to understand how different networking components interact and function together, forming the backbone of corporate and enterprise environments.

In addition to foundational knowledge, OL-8978-02 integrates a strong focus on security technologies and practices. Considering the increasing prevalence of cyber threats, the course emphasizes the importance of implementing robust security measures. Participants will learn about firewalls, intrusion prevention systems, VPNs, and other critical security technologies. This focus ensures that learners are prepared to safeguard networks against evolving security threats, a necessity in today’s digital landscape.

Another distinguishing characteristic of the OL-8978-02 curriculum is its emphasis on hands-on experience. The program often includes practical labs and simulations, allowing participants to apply theoretical knowledge in real-world scenarios. This experiential learning approach is pivotal for solidifying skills and boosting confidence in network management tasks.

Furthermore, OL-8978-02 addresses the latest advancements in networking technology, including software-defined networking (SDN) and cloud computing. By introducing emerging technologies, this curriculum ensures that professionals remain ahead of the curve, ready to adapt to the future demands of networking.

Finally, Cisco Systems OL-8978-02 positions itself not only as an educational tool but also as a career catalyst, providing learners with skills that are highly sought after in the IT job market. Upon completion, participants often find themselves well-prepared for various Cisco certifications, which can enhance their employability and professional growth opportunities in a competitive landscape. Through its thorough approach, OL-8978-02 plays a vital role in shaping the next generation of network professionals.
Top Page Image Contents