Cisco Systems OL-8978-02 How to Use SmartPorts in Your Network, Ciscoipphone Macro Statement

Page 43

Chapter 55 Configuring a VoIP Network

Using SmartPorts

ciscoipphone Macro Statement

The ciscoipphone macro command results in the following configuration:

set port macro mod/port ciscoipphone vlan vlan [auxvlan auxvlan]

----------------------------------------------------------

set port enable mod/port

set port l2protocol-tunnel mod/port cdp stp vtp disable set port membership mod/port static

set port host mod/port set vlan mod/port vlan

set port auxiliaryvlan mod/port auxvlan (set to none if not specified) set port inlinepower mod/port auto (if supported by module)

set cdp enable

set cdp enable mod/port set cdp version v2

set qos autoqos

set port qos mod/port autoqos voip ciscoipphone

ciscosoftphone Macro Statement

The ciscosoftphone macro command results in the following configuration:

set port macro mod/port ciscosoftphone vlan vlan

----------------------------------------------------------

set port enable mod/port

set port l2protocol-tunnel mod/port cdp stp vtp disable set port membership mod/port static

set port host mod/port set vlan mod/port vlan

set port auxiliaryvlan mod/port none set qos autoqos

set port qos mod/port autoqos voip ciscosoftphone

How to Use SmartPorts in Your Network

Depending on the interface and what is connected to it, you need to execute different automatic voice macros. For each port, enter the port-based macro command with the appropriate keyword as shown in Table 55-8.

Table 55-8 Using Automatic Voice Configuration Keywords

Keyword

Port Type

 

 

ciscoipphone

Ports that connect only a Cisco IP Phone 79xx.

 

 

ciscoipphone

Ports that connect a Cisco IP Phone 79xx with a PC connected

 

to the 79xx.

ciscoipphone

Ports that connect a Cisco IP Phone 79xx with a PC connected

 

to the 79xx running Cisco SoftPhone1.

ciscosoftphone

Ports that connect a PC running Cisco SoftPhone without a

 

Cisco IP Phone 79xx.

 

 

1.For cases where the ports connect a Cisco IP Phone 79xx with a PC running Cisco SoftPhone, the control traffic through CTI communication with the Cisco CallManager is tagged but is remarked to DSCP 0.

 

 

Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7

 

 

 

 

 

 

OL-8978-02

 

 

55-43

 

 

 

 

 

Page 42 Page 44
Image 43
Page 42 Page 44
Contents 55-1 A P T E R55-2 Cisco IP Phone55-3 55-4 55-5 Access GatewaysCisco CallManager Analog Station Gateway55-6 FXS Interface FeaturesAnalog Trunk Gateway Digital Trunk Gateway55-7 Digital Signal Processing Per T1/E1 PortConverged Voice Gateway Link Management55-8 How a Call Is Made55-9 Switch-to-Phone ConnectionsShow port inlinepower Voice-Related CLI CommandsCLI Commands Ethernet Module1 WS-X6608-T1/E12 WS-X6624-FXS3 Set port inlinepower Set inlinepower defaultallocationShow environment power Configuring Per-Port Power Management55-11 Show module mod Task Command55-12 Show version mod Power Management Modes55-13 Phone Class Required Power W Power Requirements55-14 Phone Removal Available PowerWall-Powered Phones Powering Off the PhoneHigh-Availability Support Phone Detection Summary55-16 55-17 Setting the Power Mode of a Port or a Group of PortsSetting the Default Power Allocation Set port inlinepower mod/port auto staticShow port inlinepower mod /port detail Set inlinepower notify-threshold percentage55-18 Console enable show environment power Displaying the Switch Power Environment for ModulesShow environment power mod Console show port inlinepower 4/1 detail55-20 Configuring the Auxiliary VLANs on Catalyst LAN SwitchesEnter the set port auxiliaryvlan mod/port auxvlanid command Understanding the Auxiliary VLANsUntagged dot1p none Auxiliary Vlan Configuration GuidelinesConfiguring the Auxiliary VLANs Set port auxiliaryvlan mod /ports vlan55-22 Verifying the Auxiliary Vlan ConfigurationDisabling the Auxiliary VLANs Until an IP Phone is Detected Keyword ActionConfiguring a Port Voice Interface Configuring the Access Gateways55-23 Show port voice fdl mod /port Displaying a Port Voice Interface ConfigurationDisplaying the FDL Statistics Show port voice interface mod /portShow port mod /port Displaying the Port Configuration for the Individual PortsConsole enable show port voice fdl 7/1-3 Field Description55-26 Port T1/E1 Pstn Interface ModuleConsole show port 55-27 55-28 Port FXS Analog Interface Module55-29 Displaying the Active Call InformationShow port voice active mod/port All call conference transcode ipaddrConsole show port voice active 55-30Console show port voice active 3/2 Understanding How QoS Works in the Cisco IP Phone Configuring QoS in the Cisco IP Phone55-31 Untrusted Configuring QoS in the Cisco IP PhoneSetting the Phone Access Port Trust Mode Set port qos mod/ports...trust-ext trusted55-33 Configuring a Trusted Boundary to Ensure Port SecuritySetting the Phone Access Port CoS Value Verifying the Phone Access Port QoS Configuration55-34 QoS and Cisco IP Phone ConfigurationQoS, Cisco IP Phone, and PC Configuration Supported Cisco IP Phones55-35 Trusted Boundary Configuration Guidelines55-36 Configuring a Trusted Boundary55-37 Default ConfigurationSpecifying a Cisco IP Phone as the Trust Device Verifying a Port’s Trust-Device State55-38 Understanding SmartPorts MacrosSmartPorts-Cisco Softphone SmartPorts-Cisco IP Phone55-39 SmartPorts Guidelines and Restrictions 55-41 Command DescriptionCiscoipphone Command Output CLI Interface for SmartPortsDetailed SmartPorts Statements Ciscosoftphone Command OutputConsole enable set port macro 3/1 ciscoipphone vlan Console enable set port macro 3/1 ciscosoftphone vlanKeyword Port Type How to Use SmartPorts in Your NetworkCiscoipphone Macro Statement Ciscosoftphone Macro StatementCiscorouter SmartPorts Template SmartPorts Enhancements in Software Release55-44 Set port macro mod/port ciscodesktop vlan vlan Ciscoswitch SmartPorts TemplateCiscodesktop SmartPorts Template 55-45Set port macro mod/port ciscosoftphone vlan nativevlan Ciscoipphone SmartPorts TemplateCiscosoftphone SmartPorts Template 55-4655-47 Configuring User-Definable SmartPorts MacrosGlobal SmartPorts Template Overview55-48 Using the CLI to Configure User-Definable SmartPorts MacrosConsole enable set macro name videophone Creating User-Defined MacrosDefining Variables Modifying Existing User-Defined Macros55-49 Applying a User-Defined Macro Using Special Variables55-50 Console enable set port macro 3/7 videophone Console enable set port macro 3/2 videophone55-51 55-52 Displaying MacrosDisplaying Macro Variables Show macro name nameofmacro show macro allClear macro name nameofmacro clear macro all Clearing Macros and Macro Variables55-53 Show macro map all name nameofmacro port mod/port Displaying Macro Port Mappings55-54 Console enable show macro map port 3/2 Configuring a Macro within a Macro55-55 55-56

OL-8978-02 specifications

Cisco Systems OL-8978-02 is a comprehensive training curriculum designed to enhance the skills and knowledge of network professionals seeking to advance their careers in network management and security. This curriculum offers a significant focus on Cisco networking technologies and concepts, ensuring that learners are well-equipped to handle the intricacies of modern network environments.

One of the primary features of OL-8978-02 is its in-depth coverage of foundational networking concepts, which are crucial for effective network administration. The curriculum includes detailed modules on networking fundamentals, such as OSI and TCP/IP models, LAN and WAN architectures, and network protocols. This solid foundation enables learners to understand how different networking components interact and function together, forming the backbone of corporate and enterprise environments.

In addition to foundational knowledge, OL-8978-02 integrates a strong focus on security technologies and practices. Considering the increasing prevalence of cyber threats, the course emphasizes the importance of implementing robust security measures. Participants will learn about firewalls, intrusion prevention systems, VPNs, and other critical security technologies. This focus ensures that learners are prepared to safeguard networks against evolving security threats, a necessity in today’s digital landscape.

Another distinguishing characteristic of the OL-8978-02 curriculum is its emphasis on hands-on experience. The program often includes practical labs and simulations, allowing participants to apply theoretical knowledge in real-world scenarios. This experiential learning approach is pivotal for solidifying skills and boosting confidence in network management tasks.

Furthermore, OL-8978-02 addresses the latest advancements in networking technology, including software-defined networking (SDN) and cloud computing. By introducing emerging technologies, this curriculum ensures that professionals remain ahead of the curve, ready to adapt to the future demands of networking.

Finally, Cisco Systems OL-8978-02 positions itself not only as an educational tool but also as a career catalyst, providing learners with skills that are highly sought after in the IT job market. Upon completion, participants often find themselves well-prepared for various Cisco certifications, which can enhance their employability and professional growth opportunities in a competitive landscape. Through its thorough approach, OL-8978-02 plays a vital role in shaping the next generation of network professionals.
Top Page Image Contents