Cisco Systems OL-4314-01 manual Verifying the Phone Startup Process

Page 13

Chapter 3 Setting Up the Cisco IP Phone

Verifying the Phone Startup Process

Figure 3-2 Parts Used in Wall Mounting the Cisco IP Phone

1

2

3

Footstand adjustment knob—Raises and lowers adjustment plate

Wall mounting screw holes

Adjustment plate—Raises and lowers phone vertically

Verifying the Phone Startup Process

After the Cisco IP Phone has power connected to it, the phone begins its startup process by cycling through a variety of steps and messages. Then the main LCD screen displays:

•Current date and time

•Primary directory number

•Additional directory numbers and speed dial numbers, if configured

•Softkeys

		Cisco IP Phone 7970 Administration Guide for Cisco CallManager 3.3

	OL-4314-01			3-13
	OL-4314-01			3-13

Image 13

Contents Before You Begin Setting Up the Cisco IP PhoneNetwork Requirements Cisco CallManager ConfigurationHandset Network and Access PortsSpeakerphone External Speakers and Microphone HeadsetExternal Microphone External SpeakersSafety Safety and PerformanceSetting Up the Cisco IP Phone Before You Begin Using External Devices with Your Cisco IP Phone Installing the Cisco IP PhoneSee the Headset section on Procedure ReferenceCisco IP Phone 7970 Rear Cable Connections Procedure Adjusting Cisco IP Phone Placement on the DesktopBefore You Begin Mounting the Phone to the WallParts Used in Wall Mounting the Cisco IP Phone Verifying the Phone Startup ProcessConfiguring Startup Network Settings