Cisco Systems OL-4314-01 manual Safety and Performance

Page 6

Chapter 3 Setting Up the Cisco IP Phone

Before You Begin

microphones that are designed for personal computers and that meet the guidelines described in the “Using External Devices with Your Cisco IP Phone” section on page 3-8.

For the best performance from an external microphone, follow these guidelines:

Use a noise-cancelling or a unidirectional microphone.

If you are using external speakers, place the microphone at least 1 ft. (30 cm) away from the speakers and to the front of the speakers.

For best voice quality, keep the microphone within 2 ft. (1/2 meter) of the person who is talking into it.

Place the microphone in a convenient location, such as the upper corner of a computer monitor or on a desk stand.

To use an external microphone, you must configure the appropriate setting on the Microphones menu on the phone (choose Settings > User Preferences > Audio Preferences > Microphones). For more information, refer to the Help available on the phone via the ? button.

Safety and Performance

The following sections include important safety and performance information that you should review before you install and use your Cisco IP Phone:

Safety, page 3-6

Using External Devices with Your Cisco IP Phone, page 3-8

Safety

Review the following warnings before installing the Cisco IP Phone 7970. To see translations of these warnings, refer to the Regulatory Compliance and Safety Information for the Cisco IP Phone 7900 Series document that accompanied this device.

Warning Read the installation instructions before you connect the system to its power source.

 

Cisco IP Phone 7970 Administration Guide for Cisco CallManager 3.3

3-6

OL-4314-01

Image 6
Contents Setting Up the Cisco IP Phone Before You BeginCisco CallManager Configuration Network RequirementsNetwork and Access Ports HandsetSpeakerphone Headset External Speakers and MicrophoneExternal Speakers External MicrophoneSafety and Performance SafetySetting Up the Cisco IP Phone Before You Begin Installing the Cisco IP Phone Using External Devices with Your Cisco IP PhoneProcedure Reference See the Headset section onCisco IP Phone 7970 Rear Cable Connections Adjusting Cisco IP Phone Placement on the Desktop ProcedureMounting the Phone to the Wall Before You BeginVerifying the Phone Startup Process Parts Used in Wall Mounting the Cisco IP PhoneConfiguring Startup Network Settings