Cisco Systems OL-4314-01 manual Configuring Startup Network Settings

Page 14

Chapter 3 Setting Up the Cisco IP Phone

Configuring Startup Network Settings

If the main LCD screen appears, the phone has started up properly. If the phone does not start up properly, see the “Resolving Startup Problems” section on page 9-2.

Configuring Startup Network Settings

If you are not using DHCP in your network, you must configure these network settings on the Cisco IP Phone after installing the phone on the network:

•IP address

•IP subnet mask

•Default gateway IP address

•Domain name

•DNS server IP address

•TFTP server IP address

Collect this information and see the instructions in Chapter 4, “Configuring

Settings on the Cisco IP Phone.”

 

Cisco IP Phone 7970 Administration Guide for Cisco CallManager 3.3

3-14

OL-4314-01

Page 13 Page 14
Image 14
Page 13 Page 14
Contents Setting Up the Cisco IP Phone Before You BeginCisco CallManager Configuration Network RequirementsSpeakerphone Network and Access PortsHandset Headset External Speakers and MicrophoneExternal Speakers External MicrophoneSafety and Performance SafetySetting Up the Cisco IP Phone Before You Begin Installing the Cisco IP Phone Using External Devices with Your Cisco IP PhoneProcedure Reference See the Headset section onCisco IP Phone 7970 Rear Cable Connections Adjusting Cisco IP Phone Placement on the Desktop ProcedureMounting the Phone to the Wall Before You BeginVerifying the Phone Startup Process Parts Used in Wall Mounting the Cisco IP PhoneConfiguring Startup Network Settings
Top Page Image Contents