Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network
Using Cisco Unified IP Phones with Different Protocols
Related Topics
•Adding Phones with
•Adding Phones with
•Adding Phones with BAT, page
Adding Phones with BAT
The Cisco Unified Communications Bulk Administration Tool (BAT), which is a menu option in Cisco Unified CM Administration, enables you to perform batch operations, which includes registration, on multiple phones.
Before you can add phones using BAT only (not in conjunction with TAPS), you must obtain the MAC address for each phone.
For information about determining a MAC address, see the “Determining the MAC Address of a Cisco Unified IP Phone” section on page
To add a phone to the Cisco Unified CM, follow these steps:
Procedure
Step 1 From Cisco Unified CM, choose Bulk Administration > Phones > Phone Template. Step 2 Click Add New.
Step 3 Choose a Phone Type and click Next.
Step 4 Enter the details of phone specific parameters such as Device Pool, Phone Button Template, and Device Security Profile.
Step 5 Click Save.
Step 6 From Cisco Unified CM, choose Device > Phone > Add New to add a phone using an already created BAT phone template.
For detailed instructions about using BAT and BAT phone templates, see the Cisco Unified
Communications Manager Bulk Administration Guide, Phone Template.
Related Topics
•Adding Phones with
•Adding Phones with
•Adding Phones with Cisco Unified CM Administration, page
Using Cisco Unified IP Phones with Different Protocols
The Cisco Unified IP Phone can operate with SCCP (Skinny Client Control Protocol) or SIP (Session Initiation Protocol). You can convert a phone that is using one protocol for use with the other protocol.
This section includes these topics:
•Converting a New Phone from SCCP to SIP, page
•Converting an
| Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP) |