Cisco Systems 7971G manual Verifying the Phone Startup Process

Chapter 3 Setting Up the Cisco Unified IP Phone

Verifying the Phone Startup Process

Figure 3-3 Parts Used in Wall Mounting the Cisco Unified IP Phone

1

2

3

Footstand adjustment button—Raises and lowers adjustment plate

Wall mounting screw holes

Adjustment plate—Raises and lowers phone vertically

Verifying the Phone Startup Process

After the Cisco Unified IP Phone has power connected to it, the phone begins its startup process by cycling through the following steps.

1.These buttons flash on and off in sequence:

–Headset. (Only if the handset is off-hook when the phone powers up. In this case, hang up the handset within 3 seconds or the phone launches its secondary load instead of its primary load.)

–Mute.

–Speaker.

	Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones
3-14	OL-8182-01