Aastra Telecom 480i BROADSOFT manual Appendix a Sample Configuration Files

Appendix A: Sample Configuration Files

#Network Settings

#================

#ip:	# This value is unique to each phone on a server
	# and should be set in the "<mac>.cfg" Þle if
	# setting this manually.
#----------------------------------------------------------------------

#Line Settings

#=============

#Lines should be set in the <mac>.cfg Þle since these settings

#are unique to each phone.

#Notes: Setting parameters for lines 1 - 4 conÞgures the 4

#line/call appearance hard keys on the 480i. Setting parameters

#for lines 5 - 9 conÞgures the phone for additional line/call

#appearances that can be set up as softkeys.

#The maximum number of line/call appearances that can be

#conÞgured on the 480i is 8 or 9, depending on how the lines

#have been conÞgured.

#If all line/call appearances have been set up as private and for

#the same number, a total of 9 lines can be conÞgured. If all

#line/call appearances have been set up between two different

#numbers and as private, a total of 8 lines can be conÞgured.

#This means that when all line/call appearances are in use, 1 is

#connected while the rest are held. No further outgoing or

#incoming calls can be made until one of the line/call appearances

#becomes available.

#If shared line/call appearances have been set up, they can only

#be set up for one number.

Continued...

33Model 480i Broadsoft Admin Guide